Analisis Karakteristik Flashover Dan Arus Bocor Pada Isolator Porselin Yang Dipengaruhi Polutan Lumut Bryum SP.
DOI:
https://doi.org/10.26418/elkha.v3i2.144Abstract
Abstract– This research discussed the influence of a pollutant of bryum sp moss on the flashover voltage and leakage current characteristics of 254 mm x 146 mm ball and socket type of pin insulator, with creapage distance ( L ) of 31 cm and surface area (S) 0f 1500 mm2. The tests are conducted in High Voltage Engneering Laboratory, Tanjungpura University, Pontianak, by controlling relative humidity (RH) in a fog chamber at fixed internal values of 60 – 69 %, 70-79%,80-89% and 90-100%. The sample used are contaminated insulator at which bryum sp moss naturally had been grown on it surface. The results of research show that the existence of bryum sp. Accompanied by very humid condition resulted in decline of flashover voltage and in the contrary increase the leakage current . According to the obtained data, the flasover voltage under 80% of RH was not many declines compare to that of over 80% RH. It is considered that under 80% of bryum sp.seems to act as non conductive contaminant, and vice verse.
Kata kunci : Insulator Suspension, flashover, leakage current, humidity, pollutant, moss.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2012 ELKHA : Jurnal Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
