Deteksi Osilasi Masalah Penalaan Pengendali secara Real-time dengan Metode Deteksi Puncak Spektrum
DOI:
https://doi.org/10.26418/elkha.v11i2.34940Keywords:
control loop, oscillation, detection, controler tuning problem, peak spectral detection methodAbstract
In process industry, most control loops suffer with disturbances indicated by existing oscillations. One of the major problems of the oscillation is controller tuning problem. Peak spectral detection method which is classic and simple way is proposed as technique for detecting oscillation. Nevertheless, the utilization and performance of peak spectral detection on process oscillation detection still cannot be found. This study develops the utilization and performance of peak spectral detection method. It implemented based on IEC 61499. To evaluate the method, test data are used to set the lag value in peak spectral detection method and industrial data for obtaining performance of peak spectral detection method. With fast Fourier transform length 512 points and lag value 180 points, the developed peak spectral detection method detected two oscillations of three different oscillating signals at 461 s and 441 s.References
N. F. Thornhill dan A. Horch, â€Advances and New Directions in Plant-Wide Disturbance Detection and Diagnosis,†Control Engineering Practice, vol. 15, hal. 1196-1206, 2007.
J. W. V. Dambros, J. O. Trierweiler, dan M. Farenzena, “Oscillation detection in process industries – Part I: Review of the detection methods,†Journal of Process Control, vol. 78, hal. 108-123, 2019.
M. Jelali dan B. Huang, “Detection of Oscillating Control Loops,†in Detection and Diagnosis of Stiction in Control Loop: State of the Art and Advanced Methods, London, Springer, 2010, hal. 81-94, 2010.
K. Ghosh, U. Nallasivam, dan N. Kubal, “A Method for Automatic Detection of Controller Tuning Issues,†IFAC Papers Online, vol. 48, hal. 765-770, 2015.
J. Babuska, J. van Ast, dan S. Mesic, “A fuzzy-logic system for detecting oscillations in control loops,†IEEE on International Conference on Fuzzy System, , 2006.
K. Zhang, B. Huang, dan G. Ji, “Multiple oscillations detection in control loops by using DFT and Raleigh distribution,†IFAC Papers Online, vol. 48, hal. 529-534, 2015.
T. Hagglund, “Automatic detection of sluggish control loops,†Control Engineering Practice, vol. 7, hal. 1505-1511, 1999.
P. Kuehl dan A. Horch, “Detection of sluggish control loops – Experiences and improvements,†Control Engineering Practice, vol. 13, hal. 1019-1025, 2005.
A. V. Oppenheim dan R. W. Schafer, Discrete-Time Signal Processing, Upper Saddle River: Pearson, 2015.
V. Vyatkin,. "The IEC 61499 standard and its semantics." IEEE Industrial Electronics Magazine, vol. 3, no. 4 hal 40-48, 2009.
J. H. Christensen, "IEC 61499 architecture, engineering methodologies and software tools." International Conference on Information Technology for Balanced Automation Systems, 2002
B. A. Permana, A. N. I. Wardana, N. Effendy, “Implementation of Event-Driven Fast Fourier Transform based on IEC 61499,†2019 International Conference on Science and Technology, 2019.
A. Zoitl, T. Strasser, dan A. Valentini, “Open source initiatives as basis for the establishment of new technologies in industrial automation: 4DIAC a case studyâ€. 2010 IEEE International Symposium on Industrial Electronics. 2010
T. Strasser, M. Rooker, G. Ebenhofer, A. Zoitl, C. Sunder, A. Valentini, dan A. Martel, “Framework for distributed industrial automation and control (4DIAC)â€. 6th IEEE International Conference on Industrial Informatics, hal. 283-288. 2008
A. N. I. Wardana, “A Method for Detecting the Oscillation in Control Loops based on Variational Mode Decomposition“, 2015 International Conference on Computer, Control, Informatics and Its Applications, 2015.
G.R.R.. Dewa, A.N. I.Wardana, S. Hawibowo, “ Linear Oscillation Diagnosis of Process Variable in Control Loop Based on Variational Mode Decompositionâ€, 2018 International Conference on Science and Technology, 2018.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2020 ELKHA : Jurnal Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
