Sistem Kendali Intensitas Cahaya Lampu Penerangan Jalan Umum Menggunakan Transformator Variabel Berbasis Arduino Uno

Authors

  • Jefri Lianda Jurusan Teknik Elektro, Politeknik Negeri Bengkalis, Indonesia
  • Adam Adam Jurusan Teknik Elektro, Politeknik Negeri Bengkalis, Indonesia
  • Hikmatul Amri Jurusan Teknik Elektro, Politeknik Negeri Bengkalis, Indonesia
  • Johny Custer Politeknik Negeri Bengkalis. Program Studi, : Teknik Listrik

DOI:

https://doi.org/10.26418/elkha.v12i1.39771

Keywords:

Arduino Uno, RTC, Voltage, Lamp, SD Card

Abstract

This research discusses the Arduino Uno based public street lighting intensity control system. The street lighting technology applied so far is still conventional technology that is classified as wasteful of energy because it still uses a continuous lighting system or an On-Off system. PJU problems arise because of too much power consumption caused by the use of large power lamps and lamp operating times. This research utilizes Arduino Uno and RTC to control the value of the variable voltage output transformer based on time division. This system has been able to control the voltage of 400 watt sodium lamps.  The output voltage of the transformer has been divided into three levels, namely level 1, level 2 and level 3. The division of this level is based on the operating time of the lights, namely level 1 at 1830 WIB to 2200 WIB, level 2 at 2201 WIB until 2359 WIB, level 3 at 0000 WIB until 0530 WIB. Transformer output voltage at level 1 can be 220 volts. The output voltage of the transformer at level 2 can be 210 volts. Transformer output voltage at level 3 can be 200 volts. The intensity of the 400 watt sodium lamp light at level 1 is an average of 99.9 lux. The intensity of the 400 watt sodium lamp light at level 2 is an average of 85.45 lux. The intensity of the 400 watt sodium lamp light at level 3 is an average of 78.6 lux.

Author Biographies

Jefri Lianda, Jurusan Teknik Elektro, Politeknik Negeri Bengkalis, Indonesia

 Teknik Elektro, Politeknik Negeri Bengkalis.. SINTA ID : 5978077.

Adam Adam, Jurusan Teknik Elektro, Politeknik Negeri Bengkalis, Indonesia

 Politeknik Negeri Bengkalis: NIDN /NIP/NIDK : 1030076501: H-Index : 0 | H-Index : 1.

Hikmatul Amri, Jurusan Teknik Elektro, Politeknik Negeri Bengkalis, Indonesia

Politeknik Negeri Bengkalis. Teknik Elektronika. SINTA ID : 5978142.

Johny Custer, Politeknik Negeri Bengkalis. Program Studi, : Teknik Listrik

Politeknik Negeri Bengkalis. Program Studi, : Teknik Listrik

References

R. Ramdhoni, S. Supriyadi, and N. Nugraha, “Rancang Bangun Sistem Kontrol Dan Monitoring Lampu Otomatis Menggunakan Arduino Dengan Metode Fuzzy Logic Berbasis Android (Studi Kasus Koridor Lantai 1 dan 2 Fakultas Ilmu Komputer),†J. Nuansa Inform., vol. 12, no. 1, pp. 44–52, 2018.

A. Virginia, P. Handoko, and H. Hermawan, “Rancang Bangun Sistem Kontrol Lampu Berbasis Arduino Mega 2560,†Widyakala J., vol. 5, no. 2, pp. 146–155, 2018.

D. P. Buwana, S. Setiawidayat, and Mukhsin, “Sistem Pengendalian Lampu Penerangan Jalan Umum (PJU) Melalui Jaringan Internet Berbasis Android,†JOINTECS (Journal Inf. Technol. Comput. Sci., vol. 3, no. 3, pp. 149–154, 2018.

N. Nugraha, S. Supriyadi, and Komar, “Rancang Bangun Sistem Kontrol Dan Monitoring Lampu Otomatis Menggunakan Arduino Dengan Metode Fuzzy Logic Berbasis Android,†J. Cloud Inf., vol. 12, no. 1, pp. 50–64, 2015.

D. Setiawan, “Sistem Kontrol Lampu Menggunaan Metode Manual & Otomatis Berbasis Handphone,†SainETIn, vol. 1, no. 2, pp. 24–31, 2017.

I. P. D. S. I Ketut Darminta, I Putu Astawa, “Rancang Bangun Sistem Kontrol Cahaya Lampu Berbasis Mikrokontroler Atmega32,†Log. J. Ranc. Bangun dan Teknol., vol. 16, no. 2, pp. 134–139, 2016.

G. P. Pratama, Yuningtyastuti, and T. Sukmadi, “Perancangan Dimer Lampu Secara Otomatis Berbasis Mikrokontroler Pada Penerangan Dalam Ruangan,†TRANSMISI, vol. 15, no. 4, pp. 186–190, 2013.

I. K. Darminta, I. K. Astawa and I. P. D. Sudarmika, “Rancang Bangun Sistem Kontrol Cahaya Lampu Berbasis Mikrokontroler Atmega 32,†Jurnal Logic, vol. 16, no. 2, pp. 134–139, 2016.

M. H. Abdullah, “Rancang Bangun Sistem Kontrol Lampu Listrik Menggunakan Remote Berbasis Mikrokontroler ATMega 8535,†Ilkominfo, vol. 2, no. 1, pp. 40–47, 2019.

Z. Isfarizky, Fardian, and A. Mufti, “Rancang Bangun Sistem Kontrol Pemakaian Listrik Secara Multi Channel Berbasis Arduino (Studi Kasus Kantor LBH Banda Aceh),†Karya Ilm. Tek. Elektro, vol. 2, no. 2, pp. 30–35, 2017.

J. Lianda, J. Custer, and Adam, “Sistem Monitoring Panel Surya Menggunakan Data Logger Berbasis Arduino Uno,†in Seminar Nasional Industri dan Teknologi (SNIT, 2016, pp. 256–265.

J. Sardi, Habibullah, and Risfendra, “Rancang Bangun Sistem Monitoring Pertumbuhan Berat dan Tinggi Balita Berbasis Data pada Posyandu,†ELKHA, vol. 11, no. 2, pp. 53–59, 2019.

Downloads

Published

2020-10-10

Issue

Section

Vol.12 No. 1 April 2020