Klasterisasi Kerusakan Bearing Motor Induksi 3 Fasa Menggunakan Metode Transformasi Wavelet Diskrit dan K-Medoids
DOI:
https://doi.org/10.26418/elkha.v12i2.41511Keywords:
Induction Motor, Bearing Fault, Discrete Wavelet Transformation, K-MedoidsAbstract
The 3 phase induction motor is a reliable and strong motor also has cheap price. However induction motor are also vulnerable, from the result of survey conducted by Electric Power Research Institute (EPRI), there are 41% cases of damage occur in the bearing caused by working environment condition, bearing age, and several other factors. Bearing fault is not easily to identified, with applying the data extraction method using the Discrete Wavelet Transform (DWT) and the K-Medoids clustering method will facilitate the identification process. The extraction method will pass the data in the form of current signals into the digital filter (Low Pass Filter and High Pass Filter) to be mapped into the region of frequency and time simultaneously, and clustering method will group data based on certain characteristics. Based on the clustering tests that have been done on the 3 phase induction motor current signal data with 3 bearing conditions, the Discrete Wavelet Transformation with mother wavelet bior1.1 decomposition level 2 and K-Medoids produce an accuracy rate of 86.8%.
References
J. S. Sufrianti and A. H. Hamzah, “Simulasi Dan Deteksi Gangguan Belitan Stator Motor Induksi Tiga Fasa Menggunakan Arus Starting Dengan Matlab/Simulink,†Jom FTEKNIK, vol. 4, pp. 1–11, 2017.
D. Meidiasha, M. Rif, and M. Subekti, “Alat Pengukur Getaran, Suara Dan Suhu Motor Induksi Tiga Fasa Sebagai Indikasi Kerusakan Motor Induksi Berbasis Arduino,†J. Electr. Vocat. Educ. Technol., vol. 5, no. 1, pp. 366–370, 2020.
M. Abduh, I. D.P.K, and B. Y. Dewantara, “Deteksi Kerusakan Outer Race Bearing pada Motor Induksi Menggunakan Analisis Arus Stator,†Semin. Nas. Inov. dan Apl. Teknol. di Ind., vol. 1, no. 2, pp. 1–6, 2019.
A. Radiansyah and A. Gifson, “Inspeksi Overhaul Motor Induksi 3 Fasa 1000 KW di PT. Mesindo Tekninesia,†TESLA J. Tek. Elektro, vol. 21, no. 2, pp. 14–26, 2019.
E. R. Purnamasari, I. Diah, and B. Y. Dewantara, “Monitoring Kondisi Ball Bearing Pada Motor Induksi Melalui Analisa Arus Stator Berbasis Wavelet Transform,†Pros. SNST ke-10 Tahun 2019 Fak. Tek. Univ. Wahid Hasyim 49, pp. 48–53, 2019.
B. P. W. Rianto, E. S. Ningrum, Z. Darojah, and H. Hermawan, “Artificial Neural Network Through Energy Value of Empirical Mode Decomposition Feature Extraction based: Application on Bearing Fault Diagnosis,†IES 2019 - Int. Electron. Symp. Role Techno-Intelligence Creat. an Open Energy Syst. Towar. Energy Democr. Proc., pp. 387–393, 2019.
Iradiratu, “Deteksi Kerusakan Inner Race Bearing Menggunakan Motor Current Signature Analysis Berbasis Fast Fourier Transform,†J. Tek. Elektro Dan Komput. Triac, vol. 6, no. 1, pp. 6–9, 2019.
V. Asanza, E. Pelaez, and F. Loayza, “EEG signal clustering for motor and imaginary motor tasks on hands and feet,†2017 IEEE 2nd Ecuador Tech. Chapters Meet., vol. 2017-Jan, pp. 1–5, 2018.
F. Ilman Huda, I. D.P.K, and B. Yan Dewantara, “Identifikasi Gangguan Belitan Stator Motor Induksi Metode Wavelet,†Pros. SNST ke-10 Tahun 2019, pp. 42–47, 2017.
N. Hasanah, A. B. Muljono, and I. M. B. Suksmadana, “Penentuan Lokasi Gangguan Hubung Singkat Pada Saluran Transmisi 150 Kv Berbasis Transformasi Wavelet,†Dielektrika, vol. 5, no. 1, pp. 42–47, 2018.
V. Apryaleva, B. Hidayat, and S. Aulia, “Simulasi Dan Analisis Sistem Klasifikasi Batubara Menggunakan Discrete Wavelet Transform (Dwt), Fuzzy Color Histogram (Fch) Dan K-Nearest Neighbor (K-Nn) Pada Citra Digital,†e-Proceeding Eng., vol. 3, no. 2, pp. 1911–1918, 2016.
T. I. Saputra, F. Fauziah, and N. Hayati, “Implementasi Discrete Wavelet Transform Pada Aplikasi Kompresi Citra Medis,†J. InfomediaTeknik Inform. Multimed. Jar., vol. 4, no. 2, pp. 101–107, 2020.
I. Kamila, U. Khairunnisa, and Mustakim, “Perbandingan Algoritma K-Means dan K-Medoids untuk Pengelompokan Data Transaksi Bongkar Muat di Provinsi Riau,†J. Ilm. Rekayasa dan Manaj. Sist. Inf., vol. 5, no. 1, pp. 119–125, 2019.
Z. Mustofa and I. S. Suasana, “Algoritma Clustering K-Medoids pada E-Goverment Bidang Information and Communication,†J. Teknol. Inf. dan Komun., vol. 9, no. 1, pp. 1–10, 2018.
A. Amalia, D. R., Narasatu, R., Faqih, “Perbandingan Hasil Klasifikasi Rasa Minuman Thai Tea yang Paling Digemari Menggunakan K-means dan K-medoids,†Pros. Semin. Nas. Unimus, vol. 2, pp. 401–407, 2019.
D. F. Pramesti, Lahan, M. Tanzil Furqon, and C. Dewi, “Implementasi Metode K-Medoids Clustering Untuk Pengelompokan Data,†J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 1, no. 9, pp. 723–732, 2017.
M. I. Ghozali, R. Z. Ehwan, and W. H. Sugiharto, “Analisa Pola Belanja Menggunakan Algoritma Fp Growth, Self Organizing Map (Som) Dan K Medoids,†Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 8, no. 1, pp. 317–326, 2017.
M. Basis, O. Equipment, and E. Oee, “Penentuan Fungsi Basis Wavelet Terbaik Untuk Sinyal Suara,†Simp. Nas. Teknol. Terap. 5, vol. 3, no. 1988, pp. 172–178, 2017.
B. Robi’in, “Analisis Dekomposisi Wavelet Pada Pengenalan Pola Lurik Dengan Metode Learning Vector Quantization,†Ilk. J. Ilm., vol. 9, pp. 153–160, 2017.
W. S. Manjoro, M. Dhakar, and B. K. Chaurasia, “Operational analysis of k-medoids and k-means algorithms on noisy data,†Int. Conf. Commun. Signal Process. ICCSP 2016, pp. 1500–1505, 2016.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2020 ELKHA : Jurnal Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
