Perbandingan Perolehan Daya Solar Panel Monocrystalline Terhadap Solar Panel Polycrystalline

Authors

  • Ervan Pratama Program Studi Teknik Elektro
  • Richa Watiasih Universitas Bhayangkara Surabaya, Indonesia

DOI:

https://doi.org/10.26418/elkha.v12i2.41518

Keywords:

Solar cell, Monocrystalline, Polycrystalline, Logging Data

Abstract

The availability of two types of solar panels that are common in the market namely monocrystalline and polycrystalline types cause confusion in the selection so that many solar panel users are questioning the differences of these two types of solar panel. This study produced a data logger system using Arduino Uno R3 to control voltage, current and temperature sensors for logging data that stores power measurement data from monocrystalline and polycrystalline solar panel in a micro SD. After it we can manage data to compare power produced between two types the solar panel. From the results of testing this data logger system it can be seen that monocrystalline solar panel are 9.18% better on power produced than polycrystalline when the maximum power conversion is generated.

Author Biographies

Ervan Pratama, Program Studi Teknik Elektro

Program Studi Teknik Elektro, Universitas Bhayangkara Surabaya, Indonesia

Richa Watiasih, Universitas Bhayangkara Surabaya, Indonesia

Program Studi Teknik Elektro, Universitas Bhayangkara Surabaya, Indonesia

References

N.A. Handayani dan D. Ariyanti, “Potency Solar Energy Application in Indonesia", Int. Journal of Renewable Energy Development (IJRED), pp. 33–38, 2012.

S. Sharma, K. K. Jain, dan A. Sharma, "Solar Panels: In Research and Applications-A Review", Materials Sciences and Applications, Vol. 6, 1145-1155, 2015,

N. Pasaribu, Rusdianasari, dan A. Syarif, “Efficiency of 9KWp Sun Tracking Photovoltaic in Palembang, Indonesia", 6th International Conference on Sustainable Agriculture, Food and EnergyI (OP Conference Series: Earth and Environmental Science 347), pp.1-6, 2019.

L.A. Dobrzański, A. Drygała, M. Giedroć, dan M. Macek, “Monocrystalline Silicon Solar Panels Applied in Photovoltaic System", Journal of Achievements in Materials and Manufacturing Engineering, vol. 53, no. 1, pp. 7–13, 2012.

A. Tasçioglu, O. Taskin, dan A. Vardar, “A Power Case Study Monocrystalline Polycrystalline Solar Panels Bursa City, Turkey", International Journal of Photoenergy, pp. 1–7, 2016.

O. Eseosa dan U. Roland, "Design and Simulation of Solar Monitoring Tracking System", IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE), e-ISSN: 2278-1676, Vol 4, issue 5, pp. 35-39, 2015.

R. Şihab, Y. Öner, S. Gorgulu, dan B. Uslu, “Polycrystalline Photovoltaic Test Set Design", IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) e-ISSN: 2278-1676, p-ISSN: 2320-3331, Vol. 13, Issue 1 ver.1, pp. 17–22, 2018.

Y. Hailu, “Non-inverting Operational Amplifier,†2018. [Online]. Available: https://www.electronics-tutorials. ws/opamp/opamp_3.html. [Accessed: 26-Jul-2020].

A. Faudin, "Tutorial Arduino Mengakses Modul RTC DS3231", Available on: https://www.nyebarilmu.com.

Downloads

Additional Files

Published

2020-10-11

Issue

Vol. 12 No. 2 October 2020

Section

Vol.12 No. 2 October 2020

License

Copyright (c) 2020 ELKHA : Jurnal Teknik Elektro

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

1. Proposed Policy for Journals That Offer Open Access


Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a  Creative Commons Attribution License  that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See  The Effect of Open Access).

2. Proposed Policy for Journals That Offer Delayed Open Access


Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a  Creative Commons Attribution License  that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See  The Effect of Open Access).