Design of Cooling and Heating Tool Using Thermoelectric Peltier Based On Arduino Uno
DOI:
https://doi.org/10.26418/elkha.v13i1.44421Keywords:
Thermoelectric, peltier, arduino uno, cooler, heaterAbstract
Cooler is an electronic device used to cool food and drinks. The current cooling system still uses refrigerants that can damage the ozone layer. The thermoelectric based cooling system can be used as an alternative since it produces sufficient temperature difference on both sides by considering its advantages that is more environmentally friendly. This research is aimed to design and built a cooling and heating system using a thermoelectric Peltier TEC 12715 based on microcontroller Arduino uno. This system uses the Peltier thermoelectric effects as coolant and warmer because it produces temperature difference on both sides. Based on this research, in the no load condition the system can produce a cold temperature of 21,3 ℃ and a hot temperature of 80,2 ℃ in the 40th minute of use. When given a load of 300 ml and 220 ml drink bottles, the system can produce a cold temperature of 22,2 ℃ and a hot temperature of 70,7 ℃ in the 40th minute of use. The TEC 12715 Peltier component used in this research produces the optimal temperature if a voltage of 12 volts and a current of 15 amperes are applied to each Peltier component. The designed system is able to operate repeatedly, properly, and continuously since it is directly connected to alternative current power which is common in households.
References
Willfried, Jones, Fransisco Stoeker. Alih Bahasa Supratman Hara. Refrigerasi dan Pengkondisian Udara. Erlangga, 1992.
Althouse Andrew, Turnquist Carl, Bracciano Alfred. Pendingin dan Pendingin Udara Modern: South Holland Illions The Good Heard Willcox Company Inc, 1992
Kai, Wang.. Review Sistem Pendinginan Loop Sekunder. International Journal of Refrigeration, vol. 33, no. 2, pp. 212-234, 2010
Selviana, Windy. Analisa Kinerja Kotak Pendingin dan Penghangat Menggunakan Modul Termoelektrik TEC-12706. Bandar Lampung : Universitas Lampung, 2017
Gandi, Frima. Perancangan Sistem Pendingin Air Menggunakan Elemen Peltier Berbasis Mikrokontroler ATmega 8535. Andalas University Physics Journal, vol. 5, no.1, pp. 35-41, 2016
Riffat, Saffa, Ma Xiaoli. Thermoelectrics: a review of present and potential applications. International Journal of Applied Thermal Engineering, vol. 23, no. 8, pp. 913-935, 2003.
Purwiyanti, Sri, F.X Arinto Setyawan. Aplikasi Efek Peltier Sebagai Kotak Penghangat dan Pendingin Berbasis Mikroprosessor Arduino Uno. Journal of Electrical Engineering and Technology Electrician, vol. 11, no. 3, pp. 92-125, 2017.
Sulistiyanto, Nanang. Pemodelan Sistem Pendingin Termoelektrik. Journal of Electrics, Electronics, Communications, Controls, Informatics, System Universitas Brawijaya, vol. 8, no. 1, pp. 67-72, 2014.
Min, Gao, D.M. Rowe. Improved Model for Calculating The Coefficient of Performance of Peltier Modules. International Journal of Thermoelectric Materials and Devices, vol. 41, no. 2, pp. 163-171, 1999.
Poetro, J.Eko. Konservasi Energi Pada BTS (Base Transceiverstation) Menggunakan Sistem Pendingin Arus Searah (DC Cooler). Jurnal Teknik Mesin Universitas Negeri Malang, vol. 20, no. 2, pp. 32-43, 2011.
Components101.com. 2018. Arduino Uno Technical Specifications. (Accessed on 25 November 2020). https://components101.com/microcontrollers/arduino-uno.
Datasheetpdf.com. 2014. TEC1-12715 Datasheet. (Accessed on 25 November 2020). https://data sheets pdf.com/pdf/869806/HB/TEC1-12715/1.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2021 ELKHA
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
