D-Tags Design by Combining Bluetooth Router, IoT, and Mobile Phone to Track Personal Items
DOI:
https://doi.org/10.26418/elkha.v15i1.63520Keywords:
Bluetooth Transmitter, Bluetooth Receiver, Internef of Things, Location, TimestampAbstract
Losing personal items such as a wallet or room keys is disturbing. Problems arise when clues to find the item are lacking or even non-existent. Of one hundred-two people who filled out the questionnaire about how often losing their belongings, 76% had experienced it. Because of that, it must be hard to remember where the last they put the stuff. Therefore people need tools that can help them easily find their item with a transmitter and connect to a mobile phone. Previous research showed that the transmitter with a frequency system had a detection distance of only 5 meters. From this weakness, the authors propose the development of a tracking items device that combines an Internet of Things-based Bluetooth transmitter and receiver system approach called D-Tags by combining Bluetooth routers, IoT, and mobile phones. The system is designed for both indoor and outdoor areas. Bluetooth testing allows the device to detect items up to 7.43 meters without wall obstacles. The system provided location information such as Living Room or Bedroom and the coordinates when outside the room. Regarding time, a single detection item is faster in the range of 15.13 seconds to 15.60 seconds than searching for two things simultaneously. From the tracking radius of the outdoor area, the device can track items up to 31.8 meters from the last item's position. All information tracking history can be seen on the web application. The experiment results prove that D-Tags can be used to track items by indicating their location and with a relatively short search duration.
References
. Rupen, P. V., R. Adithi, P. S. Sujith, and M. Aneesh. "G.P.S. and Bluetooth Based Object Tracking System," International Journal of Advanced Research in Computer and Communication Engineering 5, no. 1, pp.233-235, 2016.
. Ekhsan, H.M., Zainudin, M.A.A. and Hamid, J.N., "Mobile App for Wallet Tracking using G.P.S. Tracker," In 2021 6th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), Vol. 6, pp. 1-4, December 2021.
. Naro, W., Syatar, A., Amiruddin, M.M., Haq, I., Abubakar, A. and Risal, C.," Shariah Assessment Toward the Prosecution of Cybercrime in Indonesia," International Journal of Criminology and Sociology, 9, pp.572-586, 2020.
. Priya, B.J., Kunda, P. and Kumar, S., "Design and Implementation of Smart Real-Time Billing, GSM, and GPS-Based Theft Monitoring and Accident Notification Systems," In Proceedings of International Conference on Recent Trends in Machine Learning, IoT, Smart Cities and Applications: ICMISC 2020, pp. 647-661, 2021.
. Al Farouq, Ardiansyah, Ahmad Habibi, Putu Duta Hasta Putra, and Billy Montolalu, "Real-Time Field Segmentation and Depth Map Using Stereo, Color and Ball Pattern," In Proceedings of the 2nd International Conference on Electronics, Biomedical Engineering, and Health Informatics: ICEBEHI 2021, pp. 491-498, 2022.
. Yagi, T., Nishiyasu, T., Kawasaki, K., Matsuki, M. and Sato, Y., "GO-finder: a registration-free wearable system for assisting users in finding lost objects via hand-held object discovery," In 26th International Conference on Intelligent User Interfaces , pp. 139-149, April 2021.
. Haus, M., Ding, A.Y. and Ott, J., 2020, March. "Multimodal co-presence detection with varying spatio-temporal granularity," In 2020 IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops), pp. 1-7, 2020.
. Hu, X., Yu, K.M., Chuang, K.H., Hsu, H.P., Liu, C.H., Tung, S.W., Chen, Y.C., Lei, M.Y. and Tsai, N., "Design and implementation of indoor positioning system using bluetooth low energy," In I.O.P. Conference Series: Materials Science and Engineering ,Vol. 790, No. 1, p. 012009, March 2020.
. Isa, M.Z.M., Jamil, M.M.A., Ibrahim, T.N.T., Ahmad, M.S., Abd Rahman, N.A. and Adon, M.N., "Children security and tracking system using bluetooth and gps technology," In 2019 9th IEEE International Conference on Control System, Computing and Engineering (ICCSCE) , pp. 184-187, November 2019.
. Al Farouq, A., " Unmanned Aerial Vehicle Robot untuk Pemadam Api dengan Rancangan Alat Pemadam yang Efisien," Jurnal Nasional Teknik Elektro, pp. 11-18, March 2021.
. Vinarao, E.D.G., De Guzman, M.N.B., Fernandez, E.A., Quije, D.J.V., Gorres, R.C., Francisco, E.D., Delizo, R.A. and Cruz, E.N., “Athena: A Mobile Based Application for Women's Safety with GPS Tracking and Police Notification for Rizal Province,†In 2019 IEEE Student Conference on Research and Development (SCOReD), pp. 117-122, October 2019.
. Raj, J.S.," A novel information processing in IoT based real time health care monitoring system," Journal of Electronics, 2(03), pp.188-196, 2020.
. Ghazali, M.A.A., Kassim, M., Ya'acob, N., Idris, A. and Saaidin, S.," Mobile application on garbage collector tracker using google maps," In 2019 IEEE 9th International Conference on System Engineering and Technology (ICSET), pp. 287-291, October 2019.
. Jennath, H.S., Adarsh, S., Chandran, N.V., Ananthan, R., Sabir, A. and Asharaf, S., "Parkchain: a blockchain powered parking solution for smart cities," Frontiers in Blockchain, 2, p.6, 2019.
. Akter, S., Islam, T., Olanrewaju, R.F. and Binyamin, A.A.," A Cloud-Based Bus Tracking System Based on Internet-of-Things Technology," In 2019 7th International Conference on Mechatronics Engineering (ICOM) pp. 1-5, October 2019.
. Yang, G., Manela, J., Happold, M. and Ramanan, D.," Hierarchical deep stereo matching on high-resolution images," In Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition, pp. 5515-5524, 2019.
. Hauna, Z.I., Pratiwi, S., Dewi, S.D.T., Wahyudin, M. and Susanto, K., 2014, †GuALi Gantungan Anti Lali sebagai Pendeteksi,†In Pekan Ilmiah Mahasiswa Nasional Program Kreativitas Mahasiswa-Karsa Cipta, 2014.
. Samson, A.M., Dhakshyani, R. and Abdulla, R., "I.O.T. Based Sustainable Wallet Tracking System," International Journal of Advanced Science and Technology, 29(1), pp.1301-1310, 2019.
. Wang, L., Sheng, Q., Zhang, Y., Xu, J., Zhang, H. and Zhu, Z., "Tolerance of fifteen hydroponic ornamental plant species to formaldehyde stress," Environmental Pollution, 265, p.115003, 2020.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2023 ELKHA : Jurnal Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
