Design of Bluetooth Wireless Transporter Mecanum Wheeled Robot with Android Smartphone Controller for Moving Item
DOI:
https://doi.org/10.26418/elkha.v15i1.63769Keywords:
Transporter Robot, Bluetooth, Mecanum Wheel, Android, L293D,Abstract
Technology development are going so fast. One of technology development on purposed reasearch is moving item technology. Moving item can be dangerous works for human. There are some dangerous case of moving item, heavy weight items, hazardous chemical compounds, etc. Purposed research is to minimize risk from previous problem. It can reduce work load energy and minimize an accident in terms of moving items for operator, which are often encountered in the industry sector. Purposed research made bluetooth wireless transporter mecanum wheeled robot with android smartphone controller for moving item. Robot made in prototype scale. Robot size is 28x13x15 cm(s). Robot made based on arduino uno and L293D driver motor shield with android smartphone controller. Using android controller was made user easier to use. This robot design equipped with 4 mecanum wheel (4 DC motors), two 1850 battery, Arduino Uno, L293D driver motor, HC-06 bluetooth module, LCD and two M90s Servos for gripper. Gripper has two motions, shift and lift motions. After several test of purposed transporter robot, it can conclude that purposed transporter robot can controlled wireless with bluetooth from 0 to 20 meters. Purposed robot gripper has two motion Gripper test result, purposed transporter robot can shift item up to 350 grams weight load and lift an item up to 200 grams. Robot can operate up to 128 minutes with full capacity batteries . From several test, main purposed of this robot can provided. It is to moving an item to another place. Purposed robot can implements in industry sector with adjustment specification, but if weight load and dimensions match with this research, then purposed robot can be used properly.
References
I. M. Darsana and I. M. Sudjana, “A Literature Study of Indonesian Tourism Human Resources Development in the Era of Society 5.0,†Al-Ishlah: Jurnal Pendidikan, vol. 14, no. 3, pp. 2691–2700, 2022.
M. Rahmawati, A. Ruslan, and D. Bandarsyah, “The Era of Society 5.0 as the unification of humans and technology: A literature review on materialism and existentialism,†Jurnal Sosiologi Dialektika, vol. 16, no. 2, pp. 151–162, 2021.
L. K. Amifia, M. I. Riansyah, and P. D. Putra, “Design of Logistic Transporter Robot System,†Jurnal Ilmiah Teknik Elektro Komputer dan Informatika, vol. 6, no. 1, p. 19, 2020.
I. Karabegović, E. Karabegović, M. Mahmić, and E. Husak, “Implementation of industry 4.0 and industrial robots in the manufacturing processes,†in New Technologies, Development and Application II 5, 2020, pp. 3–14.
S. Dilibal, H. Sahin, J. O. Danquah, M. O. F. Emon, and J.-W. Choi, “Additively manufactured custom soft gripper with embedded soft force sensors for an industrial robot,†International Journal of Precision Engineering and Manufacturing, vol. 22, pp. 709–718, 2021.
N. Asima, “Sistem kontrol robot pemindah barang menggunakan aplikasi android berbasis Arduino Uno,†JURNAL PERENCANAAN, SAINS DAN TEKNOLOGI (JUPERSATEK), vol. 4, no. 1, pp. 961–969, 2021.
D. E. Setyawan, “Sistem Robot Penyelamat Menggunakan Metode Deteksi Viola-Jones untuk Membantu Tim Penyelamat Menemukan Korban Bencana,†ELKHA: Jurnal Teknik Elektro, vol. 11, no. 1, pp. 27–32, 2019.
N. K. Dewi, I. Mulyana, A. S. Putra, and F. R. Radita, “Konsep Robot Penjaga Toko Di Kombinasikan Dengan Pengendalian Virtual Reality (VR) Jarak Jauh,†ikraith-informatika, vol. 5, no. 1, pp. 33–38, 2021.
S. Amri and A. R. Septiadi, “The Algorithm Design and Driving Force System in Thematic Robot of Paddy Farming,†JEEMECS (Journal of Electrical Engineering, Mechatronic and Computer Science), vol. 3, no. 1, pp. 65–74, 2020.
A. Abd Jabbar and Y. Yasdar, “Sistem Kendali Gripper Adaptif Pada Robot Transporter,†Jurnal Mosfet, vol. 2, no. 2, pp. 26–31, 2022.
U. Lunnisa, H. Pathoni, and Y. R. Hais, “Perancangan Alat Pengukur Kecepatan dan Kekuatan Tendangan Serta Pukulan pada Beladiri dengan Sensor Force Sensing Resistor (FSR) Dan Nodemcu ESP32,†Journal of Electrical Power Control and Automation (JEPCA), vol. 5, no. 1, pp. 11–16, 2022.
K. Kollnig, A. Shuba, R. Binns, M. Van Kleek, and N. Shadbolt, “Are iphones really better for privacy? a comparative study of ios and android apps,†Proceedings on Privacy Enhancing Technologies, vol. 2022, no. 2, pp. 6–24, 2022.
N. Renata, N. Y. A. Wijaya, and I. B. K. Sudiatmika, “Sistem Informasi Geografis Pemetaan Museum Di Bali Berbasis Android,†JASIEK (Jurnal Aplikasi Sains, Informasi, Elektronika dan Komputer), vol. 2, no. 2, pp. 130–134, 2020.
N. Thongpance and P. Chotikunnan, “Design and Construction of Electric Wheelchair with Mecanum Wheel,†Journal of Robotics and Control (JRC), vol. 4, no. 1, pp. 71–82, 2023.
H. Fadli and E. Saefudin, “Perancangan Sistem Mekanik Robot Pemanjat Pohon Kelapa Berbasis Roda Mecanum,†FTI, 2022.
“Arduino L293D Motor Driver Shield Tutorial : 8 Steps - Instructables.†https://www.instructables.com/Arduino-L293D-Motor-Driver-Shield-Tutorial/ (accessed Mar. 17, 2023).
M. R. Ramadhan, C. Cristopher, I. D. Ramadhani, and S. Istiqphara, “Rancang Bangun Sistem Komunikasi Data Perangkat Virtual Reality Berbasis Modul Komunikasi Wireless Bluetooth HC-06,†ELECTRON: Jurnal Ilmiah Teknik Elektro, vol. 2, no. 1, pp. 27–33, 2021.
H. C. Guangzhou, “Information Technology Co., Ltd.(2011). Product data sheet.â€
J. S. L. Leong, K. T. K. Teo, and H. P. Yoong, “Four Wheeled Mobile Robots: A Review,†in 2022 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET), 2022, pp. 1–6.
F. Fahmizal, A. Priyatmoko, and A. Mayub, “Implementasi Kinematika Trajectory Lingkaran pada Robot Roda Mecanum,†Jurnal Listrik, Instrumentasi, dan Elektronika Terapan (JuLIET), vol. 3, no. 1.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2023 ELKHA : Jurnal Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
