Development of Salted Egg Maker by Using PLC Based on Osmotic Pressure Method
DOI:
https://doi.org/10.26418/elkha.v16i1.69634Keywords:
Salted Egg, PLC, , Osmotic pressureAbstract
Salted egg is one of the egg types that has a lot of devotees because it tastes a little salty and savory. Salted eggs are usually homemade in various regions. The easy process of making them has attracted many people to do so. This study developed a PLC-based on automatic system for a salted egg maker using the osmotic pressure method to accelerate the opening of the semi-permeable membrane on duck eggshells so that the salting mixture seeps into the eggs more quickly. It was carried out in an osmotic pool containing water and acetic acid at a concentration of 5%. The data collection process in designing the salted egg maker consisted of evaluating the performance of photoelectric sensors, proximity sensors, temperature controller, thermostat set point, baking time, and salted egg durability test. The results of the tests indicated that the time needed to make salted eggs from raw eggs to cooked eggs only took 36 minutes using the machine designed. Additionally, the presented salted egg maker reveals the short making time, and long salted egg durability. altogether revealing full potential to be easily used for practical applications.
References
S. Ariviani, G. Fauza, and D. Ishartani, “Peningkatan Kualitas dan Umur Simpan Telur Asin di Industri Rumah Tangga Telur Asin melalui Inovasi Proses Produksi,†Pros. Konf. Nas. Pengabdi. Kpd. Masy. Dan Corp. Soc. Responsib. PKM-CSR, vol. 2, pp. 355–360, Dec. 2019.
D. Subarkah, M. Maryono, K. Kriswanto, R. Apriyanto, K. Karsan, and F. Hasyim, “Penerapan Oven Pemanggang Telur Asin pada UMKM Telur Asin Sekaran Gunungpati Semarang,†Rekayasa J. Penerapan Teknol. Dan Pembelajaran, vol. 17, no. 2, Art. no. 2, Dec. 2019.
I. Ramli and N. Wahab, “Teknologi Pembuatan Telur Asin Dengan Penerapan Metode Tekanan Osmotik,†ILTEK J. Teknol., vol. 15, pp. 82–86, Dec. 2020.
S. Wilyanti, M. Manfaluthy, and K. Karseno, “Conveyor Control System Product Calculation Based On Programmable Logic Controller,†J. Tek., vol. 8, no. 2, Art. no. 2, Mar. 2019.
J. Susilo, “Teknologi Pembuatan Telur Asin Selama 3 Jam Melalui Manipulasi Tekanan Osmotik,†J. Litbang Sukowati Media Penelit. Dan Pengemb., vol. 1, no. 1, Art. no. 1, Nov. 2017.
Y. Syaifi, “Pembangkit Listrik Tenaga Tekanan Osmotik dengan Proses Membran,†May 2016.
R. Muradi and K. Munir, “Fish Dryer With Temperature Control Using the Fuzzy Logic Method,†Int. J. Eng. Sci. Inf. Technol., vol. 3, pp. 1–8, Jan. 2023.
“Penerapan Sistem Stop Singn Pada Pertigaan Jalan Berbasis Sensor Photo Electric Studi Kasus Pada PT.Chevron Pacific Indonesia | Jurnal Fasilkom,†Aug. 2018, Accessed: Apr. 02, 2024. [Online]. Available: https://ejurnal.umri.ac.id/index.php/JIK/article/view/793
R. Muhardian and K. Krismadinata, “Kendali Kecepatan Motor DC Dengan Kontroller PID dan Antarmuka Visual Basic,†JTEV J. Tek. Elektro Dan Vokasional, vol. 6, no. 1, Art. no. 1, Feb. 2020.
A. Goeritno and S. Pratama, “Rancang-Bangun Prototipe Sistem Kontrol Berbasis Programmable Logic Controller untuk Pengoperasian Miniatur Penyortiran Material,†J. Rekayasa Elektr., vol. 16, pp. 198–206, Dec. 2020.
C. P. Juwono, J. Joko, B. Suprianto, and E. Endryansyah, “Simulasi Sistem Proteksi Motor Induksi Tiga Fasa Terhadap Gangguan Menggunakan Programmable Logic Controller (PLC) Omron CP1H Berbasis Cx-Programmer 9.6,†J. Tek. ELEKTRO, vol. 11, no. 3, pp. 409–415, Aug. 2022.
M. A. Masykur, A. A. Arifin, and D. A. Patriawan, “Pengaruh Variasi Massa Raw Material dan Jenis Material Terhadap Respon Steady State Error Spindle Mesin Lathe Mini,†Pros. SENASTITAN Semin. Nas. Teknol. Ind. Berkelanjutan, vol. 2, no. 0, pp. 61–69, Mar. 2022.
Downloads
Additional Files
Published
Issue
Section
License
Copyright (c) 2024 ELKHA : Jurnal Teknik Elektro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
1. Proposed Policy for Journals That Offer Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
2. Proposed Policy for Journals That Offer Delayed Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication, with the work [SPECIFY PERIOD OF TIME] after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
