PENGARUH VARIASI KOMPOSISI SELULOSA JERAMI PADI DAN LIMBAH BOTOL PLASTIK POLIETILEN TEREFTALAT (PET) TERHADAP KARAKTERISTIK BIODEGRADABLE PLASTIC

Authors

  • Hanna Sjafarina Program Studi Kimia, Fakultas MIPA, Universitas Tanjungpura
  • Intan Syahbanu Program Studi Kimia, Fakultas MIPA, Universitas Tanjungpura
  • Nurlina Nurlina Program Studi Kimia, Fakultas MIPA, Universitas Tanjungpura

DOI:

https://doi.org/10.26418/indonesian.v3i3.44154

Abstract

Research on the effect of variations in the composition of rice straw cellulose on the characteristics of biodegradable PET-Cellulose plastic. The purpose of this study is to explain the effect of the composition of rice straw cellulose and PET on the characteristics of biodegradable plastic made from composite of rice straw cellulose and PET. This research was conducted  in several stages, the isolation of cellulose from rice straw, recycling PET from mineral water bottle,  mixing cellulose and PET, then testing the characteristics, the DTA-TGA thermal characteristic test, and degradation test with the soil burial test method. . In the thermal characteristics test there was a decrease in weight in samples with composition PET: cellulose 90:10; 60:40; and 50:50 each with 0.719; 0.710; 0.581 mg in the temperature range 38.30-68.32 ° C, 40.72-68.17 ° C, 41.45-80.40 ° C, while in the samples 80:20 and 70:30 there was no decrease in weight the temperature. In the sample 90:10; 80:20; 70:30; 60:40 and 50; 50 there is a decrease in weight each of 4,045; 3,909; 3,464; 2,760 and 3,205 mg at temperatures 328, 16-430.65 ° C, 362.05-442.15 ° C, 349.96-439.82 ° C, 388.29-446.70 ° C, and 325.39-420.79 ° C. The degradation test using soil burial test method obtained percent weight loss in samples with PET composition: 70:30 cellulose which was 38.24%.

References

Dewi, 2002, Hidrolisis Limbah Hasil Pertanian Secara Enzimatik, Akta Agrosia, 5: 67-71.

Habibah, Rudnin.; Darwin Yunus Nasution dan Yugia Muis., 2013, Penentuan Berat Molekul dan Derajat Polimerisasi α-Selulosa yang berasal dari Alang-Alang (Imperata cylindrical) dengan Metode Viskositas, J. Saintia Kimia, 1.

Sumartono, Nugroho Wahyu.; Fitri Handayani.; Reni Desiriana.; Wulan Novitasari dan Dea Sakinah Hulfa., 2015, Sintesis dan Kerakterisasi Bioplastik Berbasis Alang-Alang (Imperata cylindrical (L.)) dengan Penambahan Kitosan, Gliserol, dan Asam Oleat, Pelita, 10: 13-25.

Sumarni, N. K., Husin, S., Masafitri., 2013, Kajian Fisika Kimia Limbah Styrofoam dan Aplikasinya, Jurnal of Natural Science, 2(3): 123-131.

Pratiwi, R.; Driyanti Rahayu dan Melisa I. Barliana, 2016, Pemanfaatan Selulosa dari Limbah Jerami Padi (Oryza sativa) sebagai Bahan Bioplastik, Indonesian Journal of Pharmaceutical Science and Technology, 2(3): 83-91.

Gusrianto, P.; Zulharmita dan Harrizul Rivai., 2011, Preparasi dan Karakterisasi Mikrokristalin Selulosa dari Limbah Serbuk Kayu Penggergajian, Jurnal Sains dan Teknologi Farmasi, 16(2): 180-188.

Zulharmita.; Siska Nola Dewi dan Mahyuddin., 2012, Pembuatan Mikrokristalin Selulosa dari Ampas Tebu (Saccharum officinarum L.), Jurnal Sains dan Teknologi Farmasi, 17(2): 158-163.

Diantomo, W.Z dan Lukman A., 2013, Pengaruh Variasi Waktu Refluks Pada Proses Daur Ulang Polietilen Tereftalat dengan Metode Hidrolisis. Jurnal Kimia FMIPA. ITS, 1(2):1-7.

Salbeti, D., Harlia dan Intan Syahbanu., 2018, Sintesis dan Karakterisasi Termal Plastik Ramah Lingkungna Polyblend Selulosa Ampas Tebu dan Limbah Botol Plastik Polietilen Tereftalat, Jurnal Kimia Khatulistiwa, 7(2): 54-60.

Khopkar, S.M., 1990, Konsep Dasar Kimia Analitik, UI Press, Jakarta.

Rahmayanti, D, 2016, Karakteristik Sifat Termal (DTA-TGA) dan Konduktivitas Termal Keramik Cordierite Berbasis Silika Sekam Padi dengan Penambahan Alumina (0, 20, 25, dan 30 WT%), Universitas Lambung, Fakultas Matematika dan Ilmu Pengetahuan Alam, Bandar Lampung (Skripsi).

Colomines, G.; Roboin, J.J., Gikkes T, 2005, Study of the Glycolysis of PET by Oligoesters, Polymer, 46: 3230-3247.

Downloads

Published

2021-04-30

Issue

Vol. 3 No. 3 (2020)

Section

Articles

License

Copyright (c) 2021 Hanna Sjafarina, Intan Syahbanu, Nurlina Nurlina

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms: 1. Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. 2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. 3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access).