VARIATION OF SINTERING TEMPERATURE IN THE SYNTHESIS OF FLUORAPATITE FROM SNAIL SHELLS (Achatina fulica) USING THE SOL-GEL METHOD
DOI:
https://doi.org/10.26418/indonesian.v6i3.67697Abstract
Dental caries can cause porous cavities and even broken teeth, necessitating natural teeth extraction and replacement with implants. Fluorapatite, a dental implant material, can be synthesized from snail shells containing 98% calcium carbonate. This study aims to identify the characteristics of fluorapatite and determine the effect of variations in sintering temperature on the synthesis of fluorapatite made from snail shells using the sol-gel method. Variations of sintering temperature used are 700, 900, and 1100 °C. The results showed that fluorapatite synthesized with the sintering temperature of 900 °C demonstrates the highest crystallinity, according to the diffractogram results, there is an 83% presence of the apatite phase at an angle of 31.8126 °, with a crystal size of 79 nm and a particle size of 0.5 µm. Fourier-transform infrared spectroscopy analysis on the sample showed the presence of OH, OH−F, and PO43− functional groups. The sample showed a spongy surface morphology with hexagonal-shaped flowers"”a Ca/P molarity ratio 1.67References
Ananda N., Sulistyani L.D., Bachtiar E.W. (2017). Pertimbangan penggunaan implan gigi pada lansia. Insisiva Dental Journal. 6(1): 47–55.
Saidin A.A., Takarini V., Cahyanto A. (2021). Fabrication of fluorapatite cement as an anti-caries agent based on calcium phosphate cement. Padjadjaran Journal of Dentistry. 33(2): 102–108
Kathleen J., Lunardhi C.G.J., Subiyanto A. (2017). The potential of bioactive glass (novamin) and casein peptide amorphous calcium phosphate (CPP-ACP) on enamel demineralization. Conservative Dentistry Journal. 7(2): 111–119
Shabrina F.N., Hartomo B.T. (2020). Pemberian topical application fluor untuk initial caries pada pasien anak. Journal of Oral Health Care. 8(2): 95–107. ISSN: 2623-0526.
Ghomi F., Jalilifiroozinezhad S., Azami M. (2013). New precipitation method for synthesis of nano-fluorapatite. Materials Research Innovation. 17(4):257-262. doi:10.1179/1433075X12Y.0000000071.
Zeng H., Li H., Sun X., Wu M., Chen S., Haifeng. (2017). Synthesis of europium-doped fluorapatite nanorods and their biomedical applications in drug delivery. Molecules. 22(5):1–7. doi:10.3390/molecules22050753.
Dahlan K.A., Sari K., Nuzulia Y.W., Asra N.A., Sima D.Y., Zudah. (2020). Chicken eggshell-based nanofluorapatite using sonochemical and microwave-assisted precipitation methods. International Journal of Nanoelectronics and Materials.1(1):1-10.
Manafi S., Mirjalili F., Joughehdoust S. (2020). Synthesis of FAp, forsterite, and FAp/forsterite nanocomposites by sol-gel method. 6(2):35-42. doi: 10.30501/acp.2020.109549.
Catauro M., Papale F., Roviello G., Ferone C., Bollino F. (2014). Synthesis of SiO2 and CaO rich calcium silicate systems via sol-gel process: bioactivity, biocompatibility, and drug delivery tests. Journal of biomedical material research. 102: 3087–3092.
Eddy D.R., Noviyanti A.R., Janati D. (2016). Sintesis silica metode sol gel sebagai penyangga fotokatalis TiO2 terhadap penurunan kadar kromium dan besi. Jurnal Sains Materi Indonesia. 17(2): 82–89. ISSN: 1411-1098.
Rismawati, Hasri, Sudding. (2020). Kitosan asetat cangkang bekicot (Achatina fulica) sebagai antibakteri pada kain katun. Jurnal Sainsmat. 9(1): 45–56. ISSN: 2579-5686.
Kia P. (2017). Synthesis of hydroxyapatite dan fluorapatite nanoparticles with different amounts of fluoride using sol-gel method[tesis]. Malaysia (MY): Universiti Putra Malaysia.
Nakata, Kitasako Y., Sadr Y., Nakashima A., Tagami S., Junji. (2018). Effect of a calcium phosphate and fluoride paste on prevention of enamel demineralization. Dental Material Journal. 37(1):65-70. doi:10.4012/dmj.2016-347.
Kubro Z.S., Wahyudi S.T., Dahlan K.A. (2020). Synthesis of calcium phosphate: influence of sintering temperature on the formation of fluorhydroxyapatite. International Journal of Nanoelectronics and Materials. 13(1): 63-70.
Khan S., Pirvani M., Humayoun S., Anjum O., Akram S., Nathani M.A. (2019). Synthesis of nano-hydroxyapatite and nano-fluorapatite particles by sol-gel method. Pakistan Journal of Medicine and Dentistry. 8(2): 40–44.
Maisyarah A.O., Shofiyani A., Rudiyansyah. (2019). Sintesis CaO dari cangkang kerang ale-ale (Meretrix meretrix) pada suhu kalsinasi 900°C. Jurnal Kimia Khatulistiwa. 8(1): 32–35. ISSN: 2303-1077.
Ardiansah, Utami H.H., Lutfi S., Firdharini C. (2022). Preparasi katalis nanomaterial dari cangkang kerang darah (Anadara granosa L.) untuk pembuatan biodiesel dari minyak jelantah dengan menggunakan microwave. Journal of Chemical Process Engineering. 7(1): 9–16. ISSN: 2655-2967.
Meilianti. (2017). Isolasi kalsium oksida (CaO) pada cangkang sotong (cuttlefish) dengan proses kalsinasi menggunakan asam nitrat dalam pembuatan precipitated calcium carbonat (PCC). Distilasi. 2(1): 1–8.
Sanjaya H., Zainul R. (2016). Synthesis and electrical properties of ZnO-ITO and Al-ITO thin film by spin coating technique sol-gel process. Journal of Chemical and Pharmaceutical Research. 8(8): 915–921. ISSN: 0975- 7384.
Masrukan, Mujinem. 2016. Pengaruh proses sintering terhadap perubahan densitas, kekerasan, dan mikrostruktur pelet U-ZrHx. Jurnal Urania. 22(1): 1–64. ISSN: 0852-4777.
Riyanto B, Maddu A, Nurrahman. 2013. Material biokeramik berbasis hidroksiapatit tulang ikan tuna. Jurnal Pengolahan Hasil Perikanan Indonesia. 16(2): 119–132.
Maghfury T.I. (2020). Analisis x-ray diffraction (XRD) pada brazing aluminium seri 1000 dan stainless steel seri 304 dengan penambahan serbuk tembaga[skripsi]. Surakarta (ID): Universitas Muhammadiyah Surakarta.
Suci I.A., Ngapa Y.D. (2020). Sintesis dan karakterisasi hidroksiapatit (HAp) dari cangkang kerang ale-ale menggunakan metode presipitasi double stirring. Indonesian Journal of Applied Chemistry. 8(2): 73–81. ISSN: 2302-7274.
Sulistyo. (2018). Dampak proses sintering material keramik pada sifat mekanik dan dimensi suatu produk. Rotasi. 20(4): 244-248.
Abidi S.S.A., Murtaza Q. (2013). Synthesis and characterization of nano-hydroxyapatite powder using wet chemical precipitation reaction. J Master Sci Technol. 1–4. doi: 10.1016/j.jmst.2013.10.1016.
Moradkhani A., Bharvandi H., Naserifar A. (2019). Effect of sintering temperature on the grain size and mechanical properties of Al2O3-SiC nanocomposites. Journal of the Korean Ceramic Society. 56(3): 256–268. doi: 10.4191/kcers.2019.56.3.01.
Mulyani D. (2016). Kajian Suhu Kristalisasi dan Konsentrasi Etanol pada Kristalisasi Molase yang Dijernihkan [skripsi]. Bandung (ID): Universitas Pasundan.
Skoog D.A., West D,M,, Holler F,J., Crouch S.R. (2014). Fundamental of Analytical Chemistry. Brooks (US): Cengage learning.
Kamalanathan P., Ramesh S., Bang L.T., Niakan A., Tan C.Y. (2014). Synthesis and sintering of hydroxyapatite derived from eggshells as a calcium precursor. Ceramic International. doi: 10.1016/j.ceramint.2014.07.074.
Khiri M.Z.A., Matori K.A., Zainuddin N., Abdullah C.A.C., Alassan Z.N. (2016). The usability of ark clam shell (Anadara granosa) as calcium precursor to produce hydroxyapatite nanoparticles via wet chemical precipitation method in various sintering temperatures. Springer Plus. 5: 1206. doi: 10.1186/s40064-016-2824-y.
Charlena, Suparto I.H., Laila D.P.O. (2023). Sintesis dan pencirian hidroksiapatit dari cangkang keong lokan (Polymesoda placans) dengan metode presipitasi basah. Jurnal Bios Logos. 13(1): 85–96. ISSN: 2656-3282.
Putra M.G.E., Yelmida A., Evelyn. (2019). Pengaruh pH terhadap bentuk partikel hidroksiapatit dari precipitated calcium carbonate (PCC) kulit telur itik melalui metode presipitasi. Jurnal Online Mahasiswa Fakultas Teknik. 6(1): 1–5.
Rofiko H., Iriani Y., Suryana R. (2017). Pengaruh suhu sintering dalam pembuatan strontium titanat (SrTiO3) terhadap konstanta dielektrik menggunakan metode co-precipitation. Indonesian Journal of Applied Physics. 7(1): 28–36. ISSN: 2089-0133.
Venkateswarlu K., Sreekanth D., Sandhyarani M., Muthupandi V., Bose A.C., Rameshbabu N. (2012). X-ray peak profile analysis of nanostructured hydroxyapatite and fluorapatite. International Journal of Bioscience, Biochemistry, and Bioinformatics. 2(6): 389–393.
Diana D.R., Pratapa S. (2015). Analisis kristalinitas serbuk magnesium oksida hasil sintesis metode logam-terlarut asam. Jurnal Sains dan Seni ITS. 4(1): 1–4. ISSN: 2337-3520.
Riano R., Sukaryo S.G., Sugeng B., Sari Y.W., Akhiruddin. (2022). Karakteristik sifat listrik dan sifat termal hidroksiapatit, fluorhidroksiapatit, dan fluorapatit. Jurnal Al-Azhar Indonesia Seri Sains dan Teknologi. 7(2): 147–154. doi: 10.36722/sst.v7i3.1128/.
Borkowski. Przekora L., Belcarz A., Paolka A., Jozefaciuk K., Lubek G., Jojczuk T., Nogalski M., Ginalska A., Grazyna. (2020). Fluorapatite ceramics for bone tissue regeneration: synthesis, characterization, and assessment of biomedical potential. Materials Science and Engineering. 116:111211. doi: 10.1016/j.msec.2020.111211.
Roche K.J., Stanton K.T. (2014). Measurement of fluoride substitution in precipitated fluor hydroxyapatite nanoparticles. Journal of Fluorine Chemistry. 161: 102–109. doi: 10.1016/j.jfluchem.2014.02.007.
Tabrizi B.N., Fahami A. (2013). Synthesis and characterization of fluorapatite-zirconia composite nanopowders. Ceramics International. 39(4):4329-4337. doi: 10.1016/j.ceramint.2012.11.016.
Siregar F.A. (2020). Pengaruh suhu terhadap pembentukan kalsium fosfat tersubstitusi fluor pada kondisi supersaturasi [skripsi]. Bogor (ID): Institut Pertanian Bogor.
Sari D.R. (2018). Sintesis dan karakterisasi fluorapatit berbasis cangkang telur bebek dengan metode iradiasi microwave [skripsi]. Bogor (ID): Institut Pertanian Bogor.
Utama F.N. (2022). Sintesis dan karakterisasi fluorapatit dengan variasi suhu sintering berbasis cangkang keong sawah menggunakan metode presipitasi [skripsi]. Bogor (ID): Institut Pertanian Bogor.
Jioui I., Danoun K., Solhy A., Jouiad M., Zahouily M. (2016). Modified fluorapatite as highly efficient catalyst for the synthesis of chalcones via Claisen-Schmidt condensation reaction. Journal of Industrial and Engineering Chemistry. 1–8. doi: 10.1016/j.jiec.2016.06.003.
Xie J., Zhang Q., Mao S., Li X., Shen Z., Li L. (2019). Anisotropic crystal plan nature and wettability of fluorapatite. Applied Surface Science. 493(1): 294–307. doi: 10.1016/j.apsusc.2019.06.195.
Bestari AN, Sulaiman TNS, Purnamasari DA. 2017. Pengaruh pengecilan ukuran partikel pada kasus pembuatan pulveres dari tablet ibuprofen terhadap kecepatan dan profil disolusi serta stabilitasnya. Majalah Farmaseutik. 13(1): 45–55. ISSN: 2614-0063.
Firmansari V., Ratnawulan, Ramli, Fauzi A. (2016). Pengaruh waktu milling terhadap ukuran butir forsterite (Mg2SiO4) dari batuan dunit di daerah Jorong Tongar Nagari Aur Kuning, Kabupaten Pasaman Barat. Pillar of Physics. 8: 89–96
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Charlena Charlena, Yessie Widya Sari, Wulan Islamia
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms: 1. Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. 2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. 3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access).