DEVELOPMENT OF ONE PAIR ALL SHAPE FOR PLANE FIGURES MATERIALS IN GRADE VII OF JUNIOR HIGH SCHOOL

Authors

  • Satria Tu Bagus Maritim Raja Ali Haji University
  • Nur Izzati Universitas Maritim Raja Ali Haji

DOI:

https://doi.org/10.26418/jpmipa.v15i1.72086

Keywords:

One Pair All Shape, plane figures, Prop, Research and Development (R&D)

Abstract

This research aims to provide a solution to the challenges encountered in learning mathematics, particularly regarding plane figures. This specific area of study necessitates teaching aids that can effectively illustrate plane figures to students. The research primarily focuses on developing a teaching prop that enhances students' comprehension of flat shape materials. The study follows a research and development methodology, which involves product development and quality assessment. For data analysis, descriptive quantitative methods utilizing Sugiyono's descriptive percentage technique are employed to evaluate the product's validity. Based on material and media validation tests, the "One Pair All Shape" prop meets the criteria for both material and form suitability, as assessed by four validators. The material expert validation resulted in an 86.7% rating, while the media expert validation yielded an 84% rating, indicating a very valid category for both aspects.

References

Abdullah, A. A. (2016). Peran Guru dalam Mentransformasi Pembelajaran Matematika Berbasis Budaya. Prosiding Seminar Nasional Matematika dan Pendidikan Matematika. https://jurnal.fkip.uns.ac.id/index.php/snmpm/article/view/10895

Abidin, A. M. (2019). Kreativitas Guru Menggunakan Model Pembelajaran dalam Meningkatkan Hasil Belajar Siswa. Didaktika : Jurnal Kependidikan, 11(2), 225–238. https://doi.org/10.30863/DIDAKTIKA.V11I2.168

Arsyad, A. (2015). Media Pembelajaran (Asfah Rahman, Ed.; Ed. Revisi). Depok: Raja Grafindo Persada.

Bernard, M., Nurmala, N., Mariam, S., & Rustyani, N. (2018). Analisis Kemampuan Pemecahan Masalah Matematis Siswa SMP Kelas IX pada Materi Bangun Datar. SJME (Supremum Journal of Mathematics Education), 2(2), 77–83. https://doi.org/10.35706/SJME.V2I2.1317

Dewi, M. D., & Izzati, N. (2020). Pengembangan Media Pembelajaran PowerPoint Interaktif Berbasis RME Materi Aljabar Kelas VII SMP. Delta: Jurnal Ilmiah Pendidikan Matematika, 8(2), 217–226. https://doi.org/10.31941/DELTA.V8I2.1039

Dian Juniarti, N., Tanggu Renda, N., & Pendidikan Guru Sekolah Dasar, J. (2018). Penerapan Model Problem Solving untuk Meningkatkan Hasil Belajar Matematika. Jurnal Ilmiah Pendidikan Profesi Guru, 1(2), 155–163. https://doi.org/10.23887/JIPPG.V1I2.16396

Fitriawan, D. (2020). Pengembangan Bahan Ajar Aljabar Linear Elementer Berdasarkan Kemampuan Koneksi Matematis. Jurnal Pendidikan Matematika dan IPA, 11(2), 217–229. https://doi.org/10.26418/JPMIPA.V11I2.37476

Gusti Made Surya Adi Candra, I., Uloli, H., Abdul Rauf, F., Negeri Gorontalo, U., & DrIng Habibie Desa Moutong Kecamatan Tilongkabila Kab, J. B. (2022). Pengembangan Media Pembelajaran Alat Peraga Continously Variable Transmission (CVT) Sepeda Motor pada Mata Kuliah Teknologi Sepeda Motor. Jambura Journal of Engineering Education, 1(1). https://doi.org/10.37905/JJEE.V1I1.14807

Haviz, M., Sudirman, J., 137, N., Rajo, K., & Kaum Batusangkar, L. (2016). Research And Development; Penelitian Di Bidang Kependidikan Yang Inovatif, Produktif dan Bermakna. Ta’dib, 16(1). https://doi.org/10.31958/JT.V16I1.235

Higueras, M., Collado-Montero, F. J., & Medina, V. J. (2023). Colorimetric Evaluation of 3D Printing Polymers Exposed to Accelerated Aging for Cultural Heritage Applications. Color Research & Application, 48(3), 283–295. https://doi.org/10.1002/COL.22846

Iry, A. D., Wahyungsih, & Diyah R. T. (2022). Penggunaan Alat Peraga untuk Meningkatkan Motivasi dan Hasil Belajar Matematika Peserta Didik Kelas VI SD Inpres Lisabheto. MAJAMATH: Jurnal Matematika dan Pendidikan Matematika, 5(2), 132–139. https://doi.org/10.36815/MAJAMATH.V5I2.2143

Jarmita, N., Chandrawati, A. E., & Zulfiati. (2020). Pengembangan Media Seven In One Ditinjau dari Uji Kelayakan dan Uji Kepraktisan di Kelas V MI/SD Di Banda Aceh. Jurnal Ilmiah DIDAKTIKA, 21(1), 111–126. https://doi.org/10.22373/JID.V21I1.6317

Kusuma, A. M., & Mahardi, P. (2021). Analisis Deskriptif Terhadap Pengembangan Media Pembelajaran E - Modul Interaktif Berbasis Software Aplikasi Lectora Inspire. Jurnal Kajian Pendidikan Teknik Bangunan, 7(2). https://ejournal.unesa.ac.id/index.php/jurnal-kajian-ptb/article/view/42726

Maqsudi, A., Maqsudi, A., & Masugino, M. (2014). Pengembangan Perangkat Pembelajaran Perbaikan Sistem Rem Sepeda Motor. Jurnal Pendidikan Teknik Mesin, 13(2), 59. https://doi.org/10.15294/jptm.v13i2.9228

Martin, Hartini, T. I., & Ermawati, I. R. (2022). Pengujian Validasi Alat Peraga Instalasi Listrik 1 Phase dalam Perkuliahan Fisika Dasar 2. JIPFRI (Jurnal Inovasi Pendidikan Fisika dan Riset Ilmiah), 6(2), 107–112. https://doi.org/10.30599/JIPFRI.V6I2.1667

Mawaddah, S., & Anisah, H. (2015). Kemampuan Pemecahan Masalah Matematis Siswa pada Pembelajaran Matematika dengan Menggunakan Model Pembelajaran Generatif (Generative Learning) di SMP. EDU-MAT: Jurnal Pendidikan Matematika, 3(2), 166–175. https://doi.org/10.20527/EDUMAT.V3I2.644

Nasaruddin. (2015). Media dan Alat Peraga dalam Pembelajaran Matematika. Al-Khwarizmi : Jurnal Pendidikan Matematika dan Ilmu Pengetahuan Alam, 3(2), 21–30. https://doi.org/10.24256/JPMIPA.V3I2.232

Putri, B. B. A., Muslim, A., & Bintaro, T. Y. (2019). Analisis Faktor Rendahnya Minat Belajar Matematika Siswa Kelas V di SD Negeri 4 Gumiwang. Jurnal Educatio FKIP UNMA, 5(2), 68–74. https://doi.org/10.31949/EDUCATIO.V5I2.14

Rahmani, A., & Sutiawan, H. (2020). Pengaruh Model Pembelajaran Kooperatif Think Talk Write terhadap Pemahaman Konsep Matematika Siswa SMP. GAUSS: Jurnal Pendidikan Matematika, 3(1), 1–11. https://doi.org/10.30656/GAUSS.V3I1.2168

Rahmawati, D. F., Hamdani, D., & Putri, D. H. (2023). Development of Water Distribution and Water Volume Practicum Tools Using The YF-S401 Flow Sensor on Dynamic Fluid Materials in Senior High School. Jurnal Pendidikan Matematika dan IPA, 14(2), 162–176. https://doi.org/10.26418/JPMIPA.V14I2.65291

Rizal, A. S. (2023). Inovasi Pembelajaran untuk Meningkatkan Hasil Belajar Siswa di Era Digital. Attanwir : Jurnal Keislaman dan Pendidikan, 14(1), 11–28. https://doi.org/10.53915/JURNALKEISLAMANDANPENDIDIKAN.V14I1.329

Sarah, C., Karma, N., Nur, A., Rosyidah, K., & Artikel, I. (2021). Identifikasi Faktor yang Mempengaruhi Minat Belajar Siswa pada Mata Pelajaran Matematika di Kelas V Gugus III Cakranegara. PROGRES PENDIDIKAN, 2(1), 13–19. https://doi.org/10.29303/PROSPEK.V2I1.60

Sari, A. P., Jamaludin, J., & Hakim, A. R. (2021). Pengembangan Alat Peraga “BACALA†(Bangun Datar, Pecahan, Labirin) untuk Pembelajaran Matematika Tingkat Sekolah Dasar. Himpunan: Jurnal Ilmiah Mahasiswa Pendidikan Matematika, 1(1), 1–10. https://www.jim.unindra.ac.id/index.php/himpunan/article/view/3116

Hutagaol, S. P., Rejeki, A. S., Nyama, H., & Warkintin, W. (2019). Pengembangan Alat Peraga Papan Berpaku Matematika Kelas III SDN 29 Sungai Puang. J-PiMat, 1(2), 79-90. https://doi.org/10.31932/J-PIMAT.V1I2.497

Sugiyono. (2018). Metode Penelitian Kuantitatif (1st ed.). Bandung: Alfabeta.

Sundayana, R. (2014). Media dan Alat Peraga dalam Pembelajaran Matematika (1st ed.). Bandung: Alfabeta.

Wirayasa, I. D. G. P., Darmayasa, I. P., & Satyawan, I. M. (2020). Pengembangan Instrumen Penilaian Hasil Belajar Ranah Kognitif Model 4D pada Materi Sepak Bola Berdasarkan Kurikulum 2013. Jurnal Pendidikan Jasmani, Olahraga dan Kesehatan Undiksha, 8(3), 81–88. https://doi.org/10.23887/JJP.V8I3.33760

Downloads

Published

2024-01-11

Issue

Vol. 15 No. 1 (2024): January 2024

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a  Creative Commons Attribution 4.0 International License