DESIGN AND DEVELOPMENT OF FLIGHT CONTROLLER FOR QUADCOPTER DRONE CONTROL

Authors

  • Aidil Muhamad Tanjungpura University
  • Seno Darmawan Panjaitan Tanjungpura University
  • Redi Ratiandi Yacoub Tanjungpura University

DOI:

https://doi.org/10.26418/telectrical.v1i3.73681

Keywords:

UAV, Drone, Flying robot, Multirotor, Quadcopter,

Abstract

UAV (Unmanned Aerial Vehicle), also commonly called drone, is a flying robot technology that can be controlled remotely and can also fly autonomously based on the mission given by the operator. Drones are usually used for various purposes such as package delivery, watering plants, land mapping, natural disaster monitoring, photography, videography and others. Drones have many types, one of which is a drone with four motors as the main drive, commonly called a quadcopter drone. Quadcopter drones have evolved a lot based on current needs. Although quadcopter drones have many uses, the development of quadcopter drone research in Indonesia is quite slow, one of the quadcopter drone components whose development is quite slow is the flight controller. Flight controller (FC) is a main controller brain in drones that has complex functions in quadcopter drone control. The function of the FC is to regulate motor speed, stabilize and maintain altitude. In this research, FC is designed to control the stability of quadcopter drones while flying. This FC was developed by applying LoRa technology as an internal receiver. LoRa technology is used to receive control data from the remote control (RC) and simultaneously send sensor data. The purpose of this research is to design FC to improve local products in the field of technology and participate in the development of flying robot technology, especially on quadcopter drones and to determine the performance of LoRa technology after being integrated as an internal transceiver in FC for remote control of quadcopter drones.

Author Biographies

Aidil Muhamad, Tanjungpura University

Aidil Muhamad was born in Parit Jawai, December 15, 2001. He earned his Bachelor of Engineering (S.T.) degree in Electrical Engineering with a concentration in Control Engineering from Tanjungpura University in Desember 15, 2023. He can be contacted via email: aidilmuhamad151201@gmail.com.

Seno Darmawan Panjaitan, Tanjungpura University

Prof. Dr.-Ing. Seno Darmawan Panjaitan, S.T., M.T., IPM received the S.T. (Bachelor) degree in Electrical Engineering from Universitas Tanjungpura (UNTAN) in 1997, Pontianak-Indonesia M.T. (Master) degree in Electrical Engineering from Institut Teknologi Bandung (ITB) in 2001, and Dr.-Ing. Degree in Electrical and Computer Engineering from TU Kaiserslautern, in 2007. He was a Lecturer (2001-2006), Senior Lecturer (2007-2009), and Associate Professor (2010 - now) in Electrical Engineering UNTAN. He is the author of one book and more than 20 articles. His research interests include automation, control engineering, computational intelligence, energy systems, and the Internet of Things. He is an IEEE professional member and joined IEEE Robotics and Automation, IEEE Control Systems, IEEE Power and Energy Society, and IEEE Smart Grid Communities. He can be contacted at email: seno.panjaitan@ee.untan.ac.id.

Redi Ratiandi Yacoub, Tanjungpura University

Dr. Redi Ratiandi Yacoub, S.T., M.T Born in Sei Jaga, Bengkayang Regency 10 November 1971, completed the undergraduate study program in electrical engineering at Tanjungpura University in 1996, completed the master's study program in electrical engineering at Bandung Insitute of Technology 2003, and completed the doctorate study program in electrical engineering at Bandung Insitute of Technology 2015, Position: Member of the Control Engineering Expertise Group, Courses Taught: Artificial Neural Network (P); Modeling and Simulation; Computer Aided Design (P); Digital Image Processing (P); Telecommunications Network; Basic Control Systems; Linear Systems; Signal Processing System. He can be contacted at email: rediyacoub@ee.untan.ac.id.

References

T. V. Kashira, E. Setiawan, M. Hannats, and H. Ichsan, “Simulasi Kendali Altitude Quadcopter Parrot Mambo menggunakan Linearisasi Fungsi Alih dan PID,†2021. [Online]. Available: http://j-ptiik.ub.ac.id

A. K. Rahman, H. Supriyanto, and T. Meizinta, “Rancang Bangun Dan Implementasi Sistem Kendali Quadcopter Melalui Jaringan Internet Berbasis Lokasi Menggunakan Smartphone Android,†Seminar Nasional Instrumentasi, Kontrol dan Otomasi (SNIKO), 2018.

E. Roscitra Oktaria, G. E. Setyawan, and W. Kurniawan, “Sistem Kendali Jarak Tempuh Quadcopter Menggunakan Metode Proportional Integral Derivative,†2019. [Online]. Available: http://j-ptiik.ub.ac.id

F. Palaha, J. Teles, and Yolnasdi, “Analisa Rancangan Keseimbangan Menggunakan Sensor IMU Type–MPU6050 Pada Quadcopter,†SAINSTEK, vol. 8, no. 2, pp. 97–104, 2020.

S. Sumardi, H. Afrisal, and W. Dyan Nugroho, “Sistem Kendali Kestabilan Attitude Quadrotor Dengan Metode Self-Tuning Fuzzy-PD,†Jurnal Teknologi dan Sistem Komputer, vol. 8, no. 2, pp. 164–170, Apr. 2020, doi: 10.14710/jtsiskom.8.2.2020.164-170.

F. G. Mahardika, M. R. Rosa, and M. Z. Romdlony, “Desain dan Implementasi Kendali Posisi pada Quadcopter,†2021. [Online]. Available: https://www.mydronelab.com/accessories/quadcopter-

Z. Abi Manyu and M. Zoni, “Perancangan Kendali Quadcopter Berbasis Pid Menggunakan Arduino Uno,†vol. 18, no. 1, Nov. 2021.

M. A. Hariyadi and J. N. Fadila, “Evaluation of Unmanned Aerial Vehicle (UAV) Control Range System using Lora-Based Communication System using Path Loss,†Fountain of Informatics Journal, vol. 7, no. 2, pp. 57–63, Nov. 2022, doi: 10.21111/fij.v7i2.7571.

A. A. G. J. Putra, P. Pangaribuan, and A. S. Wibowo, “Implementasi Metode Kendali Fuzzy Logic Untuk Kestabilan Sikap Quadcopter Terhadap Sumbu Roll Dan Sumbu Pitch,†Jurnal TEKTRIKA, vol. 4, no. 2, pp. 46–53, Jul. 2019.

A. P. Pratiwi, A. Wajiansyah, A. Fanany, and O. Gaffar, “Optimasi Manuver Lepas Landas Pada Quadcopter Menggunakan Jaringan Syaraf Tiruan Propagasi Balik,†Prosiding Seminar Ilmu Komputer dan Teknologi Informasi, vol. 3, no. 1, 2018.

I. Ruanagara, A. S. Wibowo, and A. Rizal, “Stabilisasi Kendaraan Tanpa Awak Menggunakan 4 Propeller Dengan Metode Pengontrol Derivatif Integral,†vol. 9, no. 5, pp. 2550–2558, Oct. 2022.

R. Hidayat, Muhaimin, and A. Finawan, “Rancang Bangun Prototype Drone Penyemprot Pestisida Untuk Pertanian Padi Secara Otomatis,†JURNAL TEKTRO, vol. 3, no. 2, pp. 86–94, 2019.

A. Prianto, A. Rahman, A. Mufti, and A. Bahri, “Rancang Bangun Sistem Kendali Attitude Hold Satu Derajat Kebebasan Berbasis Metode Pid Untuk Penggerak Dua Rotor,†Jurnal Komputer, Teknologi Informasi, dan Elektro, vol. 6, no. 1, pp. 32–37, 2021.

A. Muhammad Saiful Islam, M. Rafsanjani Husain, N. K, M. Nur, and Fauziah, “Rancang Bangun Quadcopter Sebagai Alat Bantu Penyemprot Pestisida Pada Lahan Persawahan,†2021.

R. R. G. Eunike, H. Maclaurin, and H. S. Imanta, “Aplikasi Sensor Fusion untuk Mendeteksi Posisi dan Arah Pergerakan Ponsel Pintar di Dalam Ruangan,†Jurnal Telematika, vol. 14, no. 1, pp. 19–26, 2019.

M. J. Caesariano, E. Setiawan, and H. Fitriyah, “Sistem Kendali Pitch, Roll dan Ketinggian Quadcopter dengan Isyarat Tangan menggunakan Kalman Filter,†2022. [Online]. Available: http://j-ptiik.ub.ac.id

A. Pratama, A. A. N. Amrita, and D. C. Khrisne, “Rancang Bangun Sistem Monitoring Listrik Tiga Fasa Berbasis Wireless Sensor Network Menggunakan LoRa Ra-02 SX1278,†Majalah Ilmiah Teknologi Elektro, vol. 20, no. 2, p. 351, Dec. 2021, doi: 10.24843/mite.2021.v20i02.p20.

T. S. J. Putra and I. R. Widiasari, “Analisis Kualitas Signal Wireless Berdasarkan Received Signal Strength Indicator (RSSI) pada Universitas Kristen Satya Wacana,†2019.

A. Haniffullah, I. Abdi Bangsa, and A. Stefanie, “Implementasi Quadcopter Pembawa Arm Robot Pembersih Kaca Jendela Gedung Bertingkat,†Edu Elektrika Journal, vol. 9, no. 2, pp. 36–42, 2020.

P. Sukabumi, S. Saffanah, K. Wijayanto, A. Rafi, and A. Tahtawi, “Sistem Kendali Kestabilan Quadcopter dengan Navigasi Manual Berbasis Pengendali PID,†Oct. 2020.

Downloads

Published

2024-02-10

Issue

Section

Articles