Rancang Bangun Robot Terbang Penghindar Halangan dalam Ruangan Bersekat

Authors

  • Sugianto Kusuma Indrawan .

DOI:

https://doi.org/10.26418/j3eit.v6i1.28910

Abstract

Technological developments in the world of robotics later lead to flying robots. One type of flying robot or Unmanned Aerial Vehicle (UAV) is a quadcopter. In this study, researchers designed a quadcopter for navigation needs in a room that is capable of automatically avoiding obstacles (obstacle avoidance). Quadcopter design in this study uses four SRF-05 ultrasonic sensors mounted on the sides of the quadcopter. Effective distance of ultrasonic sensor readings used between 3 cm - 3 m. The sensor can only work well in that range. If the distance between the sensor and the barrier wall is outside the range of values, the sensor cannot detect the barrier wall properly so that an error will occur in reading the value.

 

Keywords: UAV, quadcopter, obstacle avoidance, SRF-05 ultrasonic sensor

Downloads

Published

2020-02-03

Issue

Vol. 6 No. 1: Juli 2018

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  • Copyright of the published articles will be transferred to the journal as the publisher of the manuscripts. Therefore, the author confirms that the copyright has been managed by the publisher.
  • Publisher of J3EIT is  Universitas Tanjungpura.
  • The copyright follows Creative Commons Attribution"“ShareAlike License (CC BY SA): This license allows to Share  "” copy and redistribute the material in any medium or format, Adapt  "” remix, transform, and build upon the material, for any purpose, even commercially.