DESIGN AND IMPLEMENTATION OF AN IOT-BASED VOLUME MONITORING SYSTEM FOR A RECTANGULAR SOLID STRUCTURE

Authors

  • Rara Chanesha Ismi Andriany Tanjungpura University
  • Redi Ratiandi Yacoub Tanjungpura University
  • Bomo Wibowo Sanjaya Tanjungpura University
  • Hendro Priyatman Tanjungpura University
  • Muhammad Saleh Tanjungpura University

DOI:

https://doi.org/10.26418/j3eit.v11i3.68696

Keywords:

Volume Measurement, IoT, Monitoring, HC-SR04, ESP 32

Abstract

The calculation of volume within a three-dimensional structure has the potential to determine its enclosed mass. This research aims to create a system that utilizes data from the HC-SR04 sensor to calculate volume, incorporating the Internet of Things (IoT) for remote monitoring. The study involves the use of HC-SR04 and DHT11 sensors to gather data on filled height and temperature. The measurement approach encompasses mathematical formulas for volume and surface area that correspond to the shape of the compartment. The ESP32 microcontroller serves as the central processing unit. Experimental trials are conducted, manipulating different height levels within the object. The results reveal differences between theoretical estimations and sensor-derived assessments, highlighted by varying outcomes in specific scenarios. The calculated volume of the filled compartment is displayed on OLED-1 and transmitted through the Blynk application. This study significantly contributes to the advancement of a sensor- and IoT-driven monitoring infrastructure, facilitating the observation of filled height and volume in physical objects. Despite certain variations observed in the trials, the outcomes consistently demonstrate minimal error rates.

References

Muhammad Ramdhan dan Taslim Arifin, Aplikasi Sistem Informasi Geografis dalam Penilaian Proporsi Luas Laut Indonesia, Jurnal Ilmiah Geomatika Volume 19 No. 2, Desember 2013, hlm. 141.

Dinas Kelautan dan Perikanan Provinsi Kalimantan Barat (2020). Perikanan Tangkap, Tersedia di: https://dislautkan.kalbarprov.go.id/ (Akses 1 Maret 2023)

Tri Nugroho Widianto, (2020). Desain Evaporator Pada Palka Berpendingin. Badan Riset dan Sumber Daya Manusia, Kementrian Kelautan dan Perikanan.

Adhitya Permana, dkk. (2015). Rancang Bangun Sistem Monitoring Volume Dan Pengisian Air Menggunakan Sensor Ultrasonik Berbasis Mikrokontroler Avr Atmega8, Jurnal Komputer dan Aplikasi Universitas Tanjungpura volume 3, No 2

Basith, Muhammad Abdul (2017) Penerapan Sensor Ultrasonik HC-SR04 Pada Sistem Pengukur Volume Pada Mobil Tangki Air Bersih. Other Thesis, Politeknik Negeri Sriwijaya.

H Priyatman, S Supriono, A Irwanto. Aplikasi Teknologi IOT Pada WTP(Water Treatment Plant) Sistem Pendingin Air Pada Mesin Pembangkit Guna Menjaga Nilai pH dan TDS Untuk Kualitas Air, Jurnal Transmisi Vol 24, No 3 Juli (2022)

Putra Rifqi Mahardika, dkk. (2022). Perancangan Sistem Kontrol Tandon Air Menggunakan Sensor HC-SR04 Berbasis Internet of Things. Jurnal Ilmiah Penelitian dan Pembelajaran Informatika volume 07, No 1

F. Furkanudin, W. Amiruddin, And A. W. Budi S. (2014). "Desain Palka Kapal Ikan Yang Efisien Guna Melayani Kebutuhan Pelayaran Di Daerah Zona Ekonomi Eksklusif," Jurnal Teknik Perkapalan, Vol. 2, No. 2

Kementrian Komunikasi dan Informatika Republik Indonesia (2018). Pesona Tuna Sebagai Penggerak Bisnis Perikanan Indonesia, Tersedia di https://www.kominfo.go.id/ (Diakses 1 Maret 2023)

Zahrul fuadi, dkk. (2016). Hubungan Panjang Berat Ikan yang Tertangkap Di Krueng Simpoe, Kabupaten Bireun, Aceh. Jurnal ilmiah mahasiswa Kelautan dan Perikanan Unsyiah Volume 1, Nomor 1:169-176.

Pimpen Pornchaloempong, dkk. (2012), Mass Volume Area Properties of Frozen Skipjack Tuna, International Journal of Food Properties.

Gunawan Hendro Cahyono, (2016). Internet Of Things (Sejarah, Teknologi dan Penerapannya). Jurnal Pusat Pengembangan Sumber Daya manusia Minyak Bumi dan Gas Bumi Vol.06 No.3

Wagino, dkk. (2018). Monitoring dan Pengisian Air Tandon Otomatis Berbasis Arduino. Technologia Jurnal Ilmiah, Vol 9, No.3

Downloads

Published

2023-12-05

Issue

Vol. 11 No. 3: December 2023

Section

Articles

License

Copyright (c) 2023 Journal of Electrical Engineering, Energy, and Information Technology (J3EIT)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Copyright of the published articles will be transferred to the journal as the publisher of the manuscripts. Therefore, the author confirms that the copyright has been managed by the publisher.
  • Publisher of J3EIT is  Universitas Tanjungpura.
  • The copyright follows Creative Commons Attribution"“ShareAlike License (CC BY SA): This license allows to Share  "” copy and redistribute the material in any medium or format, Adapt  "” remix, transform, and build upon the material, for any purpose, even commercially.