Rancang Bangun Sistem Proteksi dan Monitoring Penggunaan Daya Listrik Pada Beban Skala Rumah Tangga Berbasis Mikrokontroler ATMega328P
DOI:
https://doi.org/10.26418/pf.v6i1.23339Abstract
Telah dilakukan pembuatan alat sistem proteksi dan monitoring penggunaan daya listrik pada beban skala rumah tangga secara real time berbasis mikrokontroler Atmega328P. Dalam melakukan fungsinya, sistem menggunakan aksi kontrol on-off untuk melakukan proteksi dengan modul relay sebagai aktuator, sedangkan sensornya menggunakan sensor arus berbasis Hall effect ACS712 dan sensor tegangan ZMPT101b. Sistem tersebut juga menggunakan modul GSM sim900 untuk memberikan informasi serta untuk memonitor penggunaan daya listrik. Sistem juga dilengkapi dengan modul RTC untuk memberikan informasi waktu secara real time dan peraga LCD untuk menampilkan data hasil pembacaan sensor. Secara keseluruhan sistem telah dapat memberikan proteksi dengan cara memutuskan arus listrik ketika terjadi beban berlebih. Sistem juga telah dapat memonitor penggunaan daya listrik dengan cara menampilkan data daya pada LCD secara real time, serta mengirim SMS kepada operator. Persentase error rata-rata sistem dalam pembacaan nilai daya sebesar 1,62%.
Kata Kunci : Mikrokontroler Atmega328P, Sensor Arus ACS712, Sensor Tegangan ZMPT101b, Modul GSM SIM900
References
Febriantoro, D., Dedi. dan Sulistyowati, R., 2012, Perancangan Prototipe Sistem Kontrol dan Monitoring Pembatas Daya Listrik Berbasis Mikrokontroller. Jurnal IPTEK Vol.16 No.1, Surabaya.
Husnawati, 2013, Perancangan dan Simulasi Energi Meter Satu Phasa Menggunakan Sensosr Arus ACS712. JNTETI Vol. 2 No. 4, Palembang.
Baaret, S.F., 2013, Arduino Microcontroller Processing for Everyone! Third Edition. A Publication in the Morgan & Claypool Publishers series.
Kuswanto, R.,2010, Alat Ukur Listrik AC (Arus, Tegangan, Daya) Dengan Port Paralel, Program Diploma III Ilmu Komputer FMIPA Unniversitas Sebelas Maret, Surakarta. (Tugas Akhir).
Ardikusuma, T, 2014, Perbaikan Faktor Daya untuk Beban Rumah Tangga Secara Otomatis, Jurusan Teknik Elektro Industri, Politeknik Elektronika Negri Surabaya, Surabaya.(Tugas Akhir)
Atmaja, F.Y., 2010, Otomatisasi Kran Dan Penampung Air Pada Tempat Wudhu Berbasis Mikrokontroler, Program Diploma III Ilmu Komputer Fakultas Matematika Dan Ilmu Pengetahuan Alam Universitas Sebelas Maret, Surakarta. (Tugas Akhir).
Fatoni, M., Harianto dan Wibowo, M. C., 2013, Rancang Bangun Absensi Mahasiswa Menggunakan RFID Dengan Komunikasi Terpusat. Jcones Vol. II No.2 : 43-50.
Downloads
Published
Issue
Section
License
Copyright Notice using Creative Commons License for an Online Journal
The online journal Prisma Fisika operates under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). This copyright notice serves to inform authors, readers, and users of the terms and conditions regarding the use and distribution of the journal's content. By submitting or accessing the content, you agree to the following:
1. Content License:
a. All articles, images, and supplementary materials published in Prisma Fisika are licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
b. This license permits users to copy, distribute, and adapt the content for non-commercial purposes, provided appropriate credit is given to the original authors and the journal.
c. If you remix, transform, or build upon the content, you must distribute your contributions under the same license as the original.
2. Attribution:
a. When using or sharing content from Prisma Fisika, you must properly attribute the original authors and the journal.
b. Include the title of the article, the names of all authors, Prisma Fisika, the year of publication, the volume/issue number, and the specific page numbers.
c. Provide a hyperlink to the original article on Prisma Fisika's website, if applicable.
3. Non-Commercial Use:
a. The content published in Prisma Fisika may not be used for commercial purposes without obtaining explicit permission from the copyright holders.
b. Commercial use includes, but is not limited to, reproduction or distribution of the content for financial gain, selling or licensing the content, or using the content in products or services that are sold or monetized.
4. ShareAlike:
a. If you adapt or remix the content from Prisma Fisika, you must distribute your derivative work under the same Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
b. This provision ensures that any modifications, adaptations, or remixes of the content maintain the same open licensing framework.
5. Disclaimer:
a. The views expressed in articles published in Prisma Fisika are solely those of the authors and do not necessarily reflect the opinions or policies of the journal, its editorial board, or affiliated institutions.
b. Prisma Fisika and its editors are not liable for any errors, omissions, or damages arising from the use or interpretation of the published content.
Please note that this Copyright Notice does not supersede any additional permissions or restrictions that may be granted by individual authors or copyright holders for their specific content within Prisma Fisika. For any questions or requests regarding the use of the journal's content, please contact the editorial team at prismafisika@physics.untan.ac.id.
By accessing or contributing to Prisma Fisika, you agree to comply with the terms of this Creative Commons license. Violation of these terms may result in legal consequences as governed by applicable copyright laws.
Date: 24-05-2023
Prisma Fisika
Email: prismafisika@physics.untan.ac.id
