PROTOTIPE SISTEM PENGOLAH OTOMATIS AIR SUMUR BOR MENGGUNAKAN MIKROKONTROLER ATMEGA 328P

Authors

  • Azzahara Maghfianti Progam Studi Fisika Fakultas MIPA Universitas Tanjungpura
  • Abdul Muid Progam Studi Fisika Fakultas MIPA Universitas Tanjungpura
  • Zulfian Zulfian Progam Studi Fisika Fakultas MIPA Universitas Tanjungpura

DOI:

https://doi.org/10.26418/pf.v8i1.39891

Abstract

Telah dilakukan penelitian mengenai sistem pengolah otomatis air sumur bor menggunakan Mikrokontroler ATmega 328P. Sistem yang dibuat secara garis besar terdiri atas Mikrokontroler ATmega 328P, sensor ultrasonik HC-SR04, sensor pH, sensor kekeruhan, dan modul relay 2 channel. Sistem juga dilengkapi dengan filter air yang terdiri dari pasir halus, pasir kerang, batu kerikil, ijuk, arang, kain, dan spons filter air. Pengujian alat dibagi menjadi dua tahap, yaitu pengujian masing-masing sensor dan pengujian alat keseluruhan. Untuk menguji validitas pengukuran, hasil pengukuran sensor pH buatan dibandingkan dengan senseline plus kit pH/ion/ °C meter. Demikian pula untuk sensor kekeruhan buatan, hasil pengukurannya dibandingkan dengan turbidity meter portable 2100Q Hach. Setelah dilakukan pengujian, sensor pH memiliki hasil rata-rata error sebesar 1,781% dan sensor kekeruhan memiliki hasil rata-rata error sebesar 3,379%. Pengujian sistem keseluruhan dilakukan dengan 9 jenis sampel. Sampel utama adalah air sumur bor. Dari hasil pengujian, sistem dapat mengolah air sumur bor menjadi lebih baik dengan nilai pH dari 5,58 berubah menjadi 7,54. Tingkat kekeruhan mengalami perubahan dari 78,46 NTU menjadi 2,77 NTU. Secara keseluruhan sistem yang dirancang dapat bekerja dengan baik dalam melakukan pengolahan air sumur bor secara otomatis.

References

Departemen Kesehatan RI. (2010). Keputusan Menteri Kesehatan RI NO:492/MENKES/PER/IV/2010. Indonesia.

Amani, F. (2016). Alat Ukur Kualitas Air Minum dengan Parameter pH, Suhu, Tingkat Kekeruhan dan Jumlah Padatan Terlarut. JETri, Vol.14, No.1, 51-54

Oktaviadi, R. (2016). Sistem Pemantau Kekeruhan Air Dan Pemberi Makan Otomatis Pada Ikan Berbasis Mikrokontroler. Jurnal Ilmu Teknik Elektro Komputer dan Informatika (JITEKI), Vol.2, No.1, 9-13.

Helmiyah, S. (2018). Prototipe Sistem Kontrol Pendeteksi Kadar Kekeruhan Air Berbasis Arduino Uno. Skripsi. Universitas Jember. Jember.

Effendi, H. (2003). Telaah Kualitas Air Bagi Pengolahan Sumber Daya dan Lingkungan Perairan. Yogyakarta: Penerbit Kanasius.

Adrianto, H. (2013). Pemrograman Mikrokontroler AVR ATmega16: Menggunakan Bahasa C(Code Vision AVR) Edisi Revisi. Bandung: Informatika.

Hidayatullah, M. (2018). Prototipe Sistem Telemetri Pemantauan Kualitas Air Pada Kolam Ikan Air Tawar Berbasis Mikrokontroler. Positron Vol. 8, No.2, 43-52.

Downloads

Published

2020-04-02

Issue

Vol. 8 No. 1 (2020)

Section

Articles

License

Copyright Notice using Creative Commons License for an Online Journal

The online journal Prisma Fisika operates under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). This copyright notice serves to inform authors, readers, and users of the terms and conditions regarding the use and distribution of the journal's content. By submitting or accessing the content, you agree to the following:

1. Content License:
a. All articles, images, and supplementary materials published in Prisma Fisika are licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
b. This license permits users to copy, distribute, and adapt the content for non-commercial purposes, provided appropriate credit is given to the original authors and the journal.
c. If you remix, transform, or build upon the content, you must distribute your contributions under the same license as the original.

2. Attribution:
a. When using or sharing content from Prisma Fisika, you must properly attribute the original authors and the journal.
b. Include the title of the article, the names of all authors, Prisma Fisika, the year of publication, the volume/issue number, and the specific page numbers.
c. Provide a hyperlink to the original article on Prisma Fisika's website, if applicable.

3. Non-Commercial Use:
a. The content published in Prisma Fisika may not be used for commercial purposes without obtaining explicit permission from the copyright holders.
b. Commercial use includes, but is not limited to, reproduction or distribution of the content for financial gain, selling or licensing the content, or using the content in products or services that are sold or monetized.

4. ShareAlike:
a. If you adapt or remix the content from Prisma Fisika, you must distribute your derivative work under the same Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
b. This provision ensures that any modifications, adaptations, or remixes of the content maintain the same open licensing framework.

5. Disclaimer:
a. The views expressed in articles published in Prisma Fisika are solely those of the authors and do not necessarily reflect the opinions or policies of the journal, its editorial board, or affiliated institutions.
b. Prisma Fisika and its editors are not liable for any errors, omissions, or damages arising from the use or interpretation of the published content.

Please note that this Copyright Notice does not supersede any additional permissions or restrictions that may be granted by individual authors or copyright holders for their specific content within Prisma Fisika. For any questions or requests regarding the use of the journal's content, please contact the editorial team at prismafisika@physics.untan.ac.id.

By accessing or contributing to Prisma Fisika, you agree to comply with the terms of this Creative Commons license. Violation of these terms may result in legal consequences as governed by applicable copyright laws.

Date: 24-05-2023

Prisma Fisika
Email: prismafisika@physics.untan.ac.id