Sintesis Fotokatalis TiO2 pada Material Penyangga
DOI:
https://doi.org/10.26418/pf.v9i3.51439Abstract
Telah dilakukan penelitian berupa modifikasi material fotokatalis berbasis titanium dioksida (TiO2) pada material penyangga polipropilena (PP). Material fotokatalis adalah jenis material yang digunakan dalam beberapa proses degradasi senyawa organik dengan bantuan aktivasi oleh foton. Modifikasi dilakukan menggunakan teknik thermal milling. Teknik ini memanfaatkan Heat Deflecting Temperature untuk menempelkan TiO2 pada permukaan PP. Temperatur yang digunakan adalah 175 °C dan dilakukan selama 40 menit. Perbandingan PP dan TiO2 yang digunakan sebanyak 4:1 dengan massa masing-masing 140 g dan 35 g. Hasil penelitian ini dapat dilihat dari tiga hal yakni visual material hasil sintesis, perubahan massa, serta hasil visual proses fotodegradasi menggunakan material hasil sintesis. Visual material hasil sintesis menunjukkan permukaan yang kasap serta terjadi pertambahan massa sebesar 1,4 g untuk tiap 47 g. Hal ini menunjukkan bahwa PP telah berlapis TiO2 sehingga dapat dikatakan PP mampu menjadi material penyangga TiO2 sebagai material fotokatalis. Untuk proses fotodegradasi, terjadi perubahan warna pada limbah artifisial. Perubahan yang terjadi adalah limbah berangsur-angsur memudar. Hal ini menunjukkan performa material hasil sintesis mampu melakukan proses fotodegradasi. Pada proses ini juga tidak ditemukan adanya residu tambahan sehingga penelitian ini menunjukkan keberhasilan PP dalam solusi untuk menciptakan metode degradasi tanpa residu tambahan.
References
A. K. K. F. Y. &. K. T. Ikekawa, "On the Competition of Homogenous and Heterogenous Chain Terminations in Heterogeneous Photooxidation Catalysis by Zinc Oxide," Homogenous and Heterogenous Chain Terminations, vol. XXXVIII, no. 2, pp. 32-36, 1964.
S. Drajat, H. Aziz, A. Alif, "Seng Oksida (ZnO) Sebagai Fotokatalis pada Proses Degradasi Senyawa Biru Metilen," J. Ris.Kim, vol. I, no. 2, pp. 179-186, 2008.
Rahman, T., Fadhlulloh, M.A., Nandiyanto, A.B.D., dan Mudzakir, A. , "Review : Sintesis Titanium Dioksida Nanopartikel," Jurnal Integrasi Proses, vol. V, no. 1, pp. 15-29, 2014.
D. &. S. A. P. Dahlan, "Analisis Sifat Hidrofobik Dan Sifat Optik Lapisan Tipis TiO2," Prosiding Semirata FMIPA Universitas Lampung, pp. 163-166, 2013.
Sudirman, Karo, Aloma Karo, H, Ari, Sugeng, Bambang, Rukihati, Mashuri, "Analisis Sifat Kekuatan Tarik, Derajat, Kristalinitas, dan Struktur Mikro Komposisi Polimer Polipropilena-Pasir," Jurnal Sains Materi Indonesia, vol. 6, no. 1, pp. 19-26, 2004.
Aliah, H., Setiawana, A., & Abdullah, M., "Pemilihan Jenis Bulir Polimer Sebagai Penyangga Material Fotokatalis TiO2," Jurnal Fisika UNES, vol. IV, no. 1, pp. 1-6, 2014.
Sutisna, "Pengembangan Sistem Katalis Berbasis TiO2 dan Prototipe Fotoreaktor Untuk Penyisihan Warna dalam Model Limbah Pewarna Tekstil," Intitut Teknologi Bandung, Bandung, 2017.
Thefany, Asri, A., & Azwar, A., "Studi Eksperimental Deposisi Lapisan TiO2 pada Permukaan Bulir Polipropilena dengan Metode Thermal Milling untuk Aplikasi Fotokatalis," PRISMA FISIKA, pp. 92-95, 2021.
Hoffman, M.R., Han, S.J., Kwak, S.Y., "Environmental Application of Semiconductor Photoctalyst," Chem, no. 95, pp. 69-96, 1995.
Nuraini, I.S., Hidayanti, N., Wandayantolis, "Analisis Potensi Energi Matahari di Kalimantan Barat," Stasuin Klimatologi Kelas II Mempawah Kalimantan Barat, 2017.
Z. Yaakob, A. Gopalakrishman, S. Padikkaparambil, "Nanogold Loaded, Nitrogen Doped TiO2 Photocatalysts For Degradation of Aquatic Pollutants Under Sun Light," Solar Power, vol. IX, pp. 157-170, 2012.
Praserijono, Purwito Soegeng & Anggara, Andhika Dwi, "Perbandingan Paparan intensitas Sinar Ultraviolet (UV) pada Lampu Ultraviolet dan Sinar Matahari," Jurnal Pendidikan Fisika dan Keilmuan, 2021.
Downloads
Published
Issue
Section
License
Copyright Notice using Creative Commons License for an Online Journal
The online journal Prisma Fisika operates under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0). This copyright notice serves to inform authors, readers, and users of the terms and conditions regarding the use and distribution of the journal's content. By submitting or accessing the content, you agree to the following:
1. Content License:
a. All articles, images, and supplementary materials published in Prisma Fisika are licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
b. This license permits users to copy, distribute, and adapt the content for non-commercial purposes, provided appropriate credit is given to the original authors and the journal.
c. If you remix, transform, or build upon the content, you must distribute your contributions under the same license as the original.
2. Attribution:
a. When using or sharing content from Prisma Fisika, you must properly attribute the original authors and the journal.
b. Include the title of the article, the names of all authors, Prisma Fisika, the year of publication, the volume/issue number, and the specific page numbers.
c. Provide a hyperlink to the original article on Prisma Fisika's website, if applicable.
3. Non-Commercial Use:
a. The content published in Prisma Fisika may not be used for commercial purposes without obtaining explicit permission from the copyright holders.
b. Commercial use includes, but is not limited to, reproduction or distribution of the content for financial gain, selling or licensing the content, or using the content in products or services that are sold or monetized.
4. ShareAlike:
a. If you adapt or remix the content from Prisma Fisika, you must distribute your derivative work under the same Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
b. This provision ensures that any modifications, adaptations, or remixes of the content maintain the same open licensing framework.
5. Disclaimer:
a. The views expressed in articles published in Prisma Fisika are solely those of the authors and do not necessarily reflect the opinions or policies of the journal, its editorial board, or affiliated institutions.
b. Prisma Fisika and its editors are not liable for any errors, omissions, or damages arising from the use or interpretation of the published content.
Please note that this Copyright Notice does not supersede any additional permissions or restrictions that may be granted by individual authors or copyright holders for their specific content within Prisma Fisika. For any questions or requests regarding the use of the journal's content, please contact the editorial team at prismafisika@physics.untan.ac.id.
By accessing or contributing to Prisma Fisika, you agree to comply with the terms of this Creative Commons license. Violation of these terms may result in legal consequences as governed by applicable copyright laws.
Date: 24-05-2023
Prisma Fisika
Email: prismafisika@physics.untan.ac.id