Intermediate Band Characteristics of Defective Perovskite Cs<sub>2</sub>SnI<sub>6</sub> in Comparison with CsSnI<sub>3</sub>: Insights into Its Role as Hole Transport Material for Solar Cells

Authors

  • Yolla Sukma Handayani Teknik Industri, Universitas Bina Bangsa
  • Sri Sukmawati Statistika, Universitas Bina Bangsa
  • Adhita Asma Nurunnizar Badan Riset dan Inovasi Nasional

DOI:

https://doi.org/10.26418/positron.v16i1.99039

Keywords:

Cs2SnI6, DFT, Hole Transport Material, Intermediate Band, Perovskite Solar Cell

Abstract

Tin-based halide perovskites have recently attracted attention as promising alternatives to toxic lead-based perovskites for solar cell applications. This study aims to investigate the electronic and optical properties of cesium tin hexaiodide (Cs2SnI6) and to elucidate its functional role in perovskite solar cells, particularly in determining whether it is more suitable as a light absorber or as a hole transport material (HTM). For comparison, the properties of cesium tin tri-iodide (CsSnI₃) are also systematically analyzed using Density Functional Theory (DFT) calculations within the Perdew-Burke-Ernzerhof (PBE) functional and Heyd-Scuseria-Ernzerhof 2006 (HSE06) hybrid functional frameworks. While previous theoretical studies have predominantly examined these materials separately, a comprehensive understanding of the role of defect-induced intermediate bands in Cs2snI6 remains limited. The results reveal that CsSnI₃ exhibits a direct band gap, while Cs₂SnI₆ shows an intermediate band (IB) located between the valence band maximum (VBM) and conduction band minimum (CBM). The calculated band gap of Cs₂SnI₆ is 0.28 eV using PBE and 0.82 eV using HSE06, confirming the role of Sn(5s) and I(5p) states in the IB formation. Furthermore, optical property calculations further demonstrate that Cs₂SnI₆ exhibits a relatively high dielectric constant and distinct absorption features associated with interband transitions, although with lower absorption intensity compared to CsSnI₃. These findings suggest that CsSnI₃ is suitable as a light absorber, whereas Cs₂SnI₆ is more favorable as an HTM in perovskite solar cell architectures. Overall, this work offers new insights into the functional role of Cs₂SnI₆ and its potential contribution for efficient lead-free perovskite solar cells.

References

Li, J., Xia, R., Qi, W., Zhou, X., Cheng, J., Chen, Y., Hou, G., Ding, Y., Li, Y., Zhao, Y., and Zhang, X., Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization, Journal of Power Sources, 485, pp.229-313, 021.

Wali, Q., Iftikhar, F. J., Khan, M. E., Ullah, A., Iqbal, Y., and Jose, R., Advances in stability of perovskite solar cells, Organic electronics, 78, pp.105590, 2020.

Pitriana, P., Wungu, T. D. K., Herman, and Hidayat, R., The characteristics of band structures and crystal binding in all-inorganic

perovskite APbBr3 studied by the first principle calculations using the Density Functional Theory (DFT) method, Results in Physics, 15, pp.102592, 2019.

Jarwal, D. K., Mishra, A. K. Dubey, C., Jangid, A. K., Bhargava, K., Kumar, R., and Rawat, G., Performance analysis of hybrid perovskite solar cells based on different halide ions, Solid State Communications, 399, pp.115863, 2025.

Shen, Z., Han, Q., Luo, X., Shen, Y., Wang, Y., Yuan, Y., Zhang, Y., Yang, Y., and Han, L., Efficient and stable perovskite solar cells with regulated depletion region, Nature Photonics, 18(5), pp.450–457, 2024.

Ma, C. and Park, N. G., A Realistic Methodology for 30% Efficient Perovskite Solar Cells, Chem, 6(6), pp.1254–1264, 2020.

Bagha, G., Samavati, katayoon, NaffakhMoosavy, H., and Matin, L. F., First-principles study on bromide-based 2D hybrid organicinorganic halide perovskites for perovskite solar cells, Journal of Physics and Chemistry of Solids, 199, pp.112496, 2025.

Nair, S., Patel, S. B., and Gohel, J. V., Recent trends in efficiency-stability improvement in perovskite solar cells, Materials Today Energy, 17, pp.100449, 2020.

Li, X., Tang, J., Zhang, P., and Li, S., Review Strategies for achieving high efficiency and stability in carbon-based all-anorganic perovskite solar cells, Cell Reports Physical Science, 5(3), pp.101842, 2024.

Elumalai, N. K. and Uddin, A., Hysteresis in organic-inorganic hybrid perovskite solar cells, Solar Energy Materials and Solar Cells, 157, pp.476–509, 2016.

Abd Mutalib, M., Ahmad Ludin, N., Nik Ruzalman, N. A. A., Barrioz, V., Sepeai, S., Mat Teridi, M. A., Su’ait, M. S., Ibrahim, M. A., and Sopian, K., Progress towards highly stable and lead-free perovskite solar cells, Materials for Renewable and Sustainable Energy, 7(2), pp.1–13, 2018.

Li, J., Cao, H. L., Jiao, W. Bin, Wang, Q., Wei, M., Cantone, I., Lü, J., and Abate, A., Biological impact of lead from halide perovskites reveals the risk of introducing a safe threshold, Nature

Communications, 11(1), pp.1–5, 2020.

Slavney, A. H., Hu, T., Lindenberg, A. M., and Karunadasa, H. I., A Bismuth-Halide Double Perovskite with Long Carrier Recombination Lifetime for Photovoltaic Applications, Journal of the American Chemical Society, 138(7), pp.2138–2141, 2016.

Cortecchia, D., Dewi, H. A., Yin, J., Bruno, A., Chen, S., Baikie, T., Boix, P. P., Grätzel, M., Mhaisalkar, S., Soci, C., and Mathews, N., LeadFree MA2CuClxBr4-x Hybrid Perovskites, norganic Chemistry, 55(3), pp.1044–1052, 2016.

Anshul, Raj, M., Kushwaha, A., and Goel, N., A path to sustainable, non-toxic solar cell technologies: Exploring Cs-based halide perovskites with optimized HTLs and ETLs through SCAPS-1D and DFT studies, Journal of Physics and Chemistry of Solids, 204, pp.112777, 2025.

Wu, S., Chen, Z., Yip, H. L., and Jen, A. K. Y., Leadfree perovskites for next-generation applications: a comprehensive computational and data-driven review, Materials Advances, 6(21), pp.7634–7661, 2025.

Pecunia, V., Occhipinti, L. G., Chakraborty, A., Pan, Y., and Peng, Y., Lead-free halide perovskite photovoltaics: Challenges, open questions, and opportunities, APL Materials, 8(10), p.100901, 2020.

Jiang, X., Wang, F., Wei, Q., Li, H., Shang, Y., Zhou, W., Wang, C., Cheng, P., Chen, Q., Chen, L., and Ning, Z., Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design, Nature Communications, 11(1), pp.1–7, 2020.

Nishimura, K., Kamarudin, M. A., Hirotani, D., Hamada, K., Shen, Q., Iikubo, S., Minemoto, T., Yoshino, K., and Hayase, S., Lead-free tinhalide perovskite solar cells with 13% efficiency, Nano Energy, 74, pp.104858, 2020.

Lee, B., Stoumpos, C. C., Zhou, N., Hao, F., Malliakas, C., Yeh, C. Y., Marks, T. J., Kanatzidis, M. G., and Chang, R. P. H., Air-stable molecular semiconducting iodosalts for solar cell applications: Cs2SnI6 as a hole conductor, Journal of the American Chemical Society, 136(43), pp.15379–15385, 2014.

Lee, B., Shin, B., and Park, B., Uniform Cs2SnI6 Thin Films for Lead-Free and Stable Perovskite Optoelectronics via Hybrid Deposition Approaches, Electronic Materials Letters, 15(2), pp.192–200, 2019.

Alsalamah, I. M., Shaari, A., Alsaif, N. A. M., Yamusa, S. A., Lakshminarayana, G., and Rekik, N., Exploring the structural properties and the optoelectronic features of RbPbX3 (X = Cl, F)

perovskite crystals for solar cells solicitations: Showcasing the DFT predictions., Chemical Physics, 573pp.111978, 2023.

Rosado, A., Benites, M., and Manousakis, E., QUANTUM ESPRESSO implementation of the RPA-based functional, Computer Physics Communications, 312pp.109594, 2025.

Computational investigation of Sb-doping of CsSnI3: Insights into structural, electronic, optical, and photovoltaic performance

analysis, Computational Materials Science, 258, pp.114060, 2025.

Moschou, G., Koliogiorgos, A., and Galanakis, I., Electronic Properties of Cs-Based Halide Perovskites: An Ab Initio Study, Physica Status Solidi (A) Applications and Materials Science, 215(17), 2018.

Huang, H. M., Jiang, Z. Y., and Luo, S. J., Firstprinciples investigations on the mechanical, thermal, electronic, and optical properties of the defect perovskites Cs2SnX6 (X = Cl, Br, I),

Chinese Physics B, 26(9), pp.1–8, 2017.

Andersen, O. K., Linear methods in band theory, Phys. Rev. B, 12(8), pp.3060–3083, 1975.

West, A. R., Solid state chemistry and its applications, John Wiley & Sons, 2014.

Dawson, M., Ribeiro, C., and Morelli, M., A Review of Three-Dimensional Tin Halide Perovskites as Solar Cell Materials, Materials Research, 25, 2022.

Padmavathy, R., Amudhavalli, A., Rajeswarapalanichamy, R., and Iyakutti, K., Electronic structure and optical properties of CsSnI3-yBry (y = 0, 1, 2, 3) perovskites, International Journal of Modern Physics B, 33(4), pp.1–12, 2019.

Rasukkannu, M., Velauthapillai, D., and Vajeeston, P., A first-principle study of the electronic, mechanical and optical properties of inorganic perovskite Cs2SnI6 for intermediate-band solar cells, Materials Letters, 218, pp.233–236, 2018.

Qiu, X., Cao, B., Yuan, S., Chen, X., Qiu, Z., Jiang, Y., Ye, Q., Wang, H., Zeng, H., Liu, J., and Kanatzidis, M. G., From unstable CsSnI3 to airstable Cs2SnI6: A lead-free perovskite solar cell light absorber with bandgap of 1.48 eV and high absorption coefficient, Solar Energy Materials and Solar Cells, 159, pp.227–234, 2017.

Wang, A., Yan, X., Zhang, M., Sun, S., Yang, M., Shen, W., Pan, X., Wang, P., and Deng, Z., Controlled synthesis of lead-free and stable perovskite derivative Cs2SnI6 nanocrystals via a facile hot-injection process, Chemistry of Materials, 28(22), pp.8132–8140, 2016.

Downloads

Published

2026-03-31

Issue

Vol. 16 No. 1 (2026): Vol. 16 No. 1 Edition

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.