Karakterisasi Pengaruh Ukuran Mesh 10, 20 dan 30 terhadap Sifat Mekanis dan Fisis Material Komposit Partikel Tandan Kosong Kelapa Sawit
Keywords:
the waste of OPEB, physical properties, compositeAbstract
Oil palm empty bunch particle composite was the composite board made from polyester as a matrix and the waste particle of oil palm empty bunch as a filler. The aim of this research was to determine the physical properties of composite board. The research conducted by OPEB particle size variations, such as mesh 10 (A1), 20 (A2), and 30 (A3) with 20% of composite volume fraction (B1), 30% (B2) and 40% (B3). The test physical properties were according to ASTM standard. The result showed the composite had the lowest average density values 1,0858 gr/cm3(A3-B3). The physical properties showed that the smaller the particle size of OPEB, the density value will decrease and the greater the volume fraction of OPEB particle the density test value will decrease to.References
Afolabi, L. O., dkk, 2019. “Fabrication of pandanus tectorius (screw-pine) natural fiber using vacuum resin infusion for polymer composite applicationâ€. Mechanical Engineering Department, University Technology PETRONAS, Seri Iskandar 32610, Malaysia.
Aritonang, F. P., 2017. “Karakteristik Komposit Berpenguat Serat Tandan Kosong Kelapa Sawit dengan Fraksi Volume 3%. 5%, dan 7%â€. Fakultas Sains dan Taknologi. Universitas Sanata Dharma. Yogyakarta. Juli, 2017.
BPS, 2018. “Badan Pusat Statistik: Statistik Kelapa Sawit Indonesia 2017 (Indonesian Oil Palm Statistics 2017)â€. Jakarta. November, 2018.
Chawla, K. K., 1987. â€Composites Materials, First Edâ€. Berlin. New York: Spinger-Verlag. Inc.
Darnoko, D., dkk, 1993. â€Pembuatan Pupuk Organik dari Tandan Kosongn Kelapa Sawitâ€. Buletin PPKS 1, 89-99.
Desi, S. N., 2016, “Uji Kualitas Material Papan Komposit Bahan dari Serbuk Kayu dan Kertas dengan Perekat Limbah Plastikâ€. Jurusan Fisika. Fakultas Sains dan Teknologi. UIN Alaudin Makassar. Makassar. Agustus, 2016.
Gibson, R. F., 1994. “Principles of Composite Materials Mechanicsâ€. New York: Mc. Graw Hill, Inc.
Halimatuddahliana, dkk., 2016. “Pengaruh Bahan Pengisi Silika dan Serbuk Tandan Kosong Sawit (STKS) Termodifikasi terhadap Kekuatan Bentur dan Daya Serap Air Komposit Hibrid Poliester Tidak Jenuhâ€. Jurnal Teknik Kimia USU, Vol. 5, No.2. Medan. Juni, 2016.
Jessica, 2013. “Sifat Fisis dan Mekanis Papan Komposit Plastik dari Limbah Kelapa Sawit dan Plastik Polipropilenaâ€. Fakultas Kehutanan, Institut Pertanian Bogor. Bogor. September, 2013.
Jones, R. M., 1975. “Mechanics of composite Materialsâ€, Mc. Graw-Hill Kogakusha, LTD, Washington D.C.
Jones, R. M., 1999. “Mechanics of composite Materialsâ€. Second Edition. Taylor & Francis.
Kumar, S., dkk, 2019. “Physico-mechanical and Taguchi-designed sliding wear properties of Himalayan agave fiber reinforced polyester compositeâ€. Mechanical Engineering Departement, National Institute of Technology, Srinagar, Uttarakhand 246174, India.
Manoley, T. M., 1988. “Modern Particleboard & Dry-Process Fiberboard Manufacturingâ€. Miller Freeman Publications, Inc., 500 Howard Street. San Francisco. California 94105, USA.
Martin, S. M., 1988. “Palm oil and protest: An economic history of the Ngwa regionâ€, south-eastern Nigeria, 1800 - 1980. Cambrige.
Mazumdar, S. K., 2002. “Composite Manufacturing: Matetrials, Product and Process Engineeringâ€. Indian.
Salmina, 2017. “Studi Pemanfaatan Limbah Tandan Kosong Kelapa Sawit oleh Masyarakat di Jorong Koto Sawah Nagari Ujung Gading Kecamatan Lembah Melintangâ€. Sumatera Barat.
Smallman, R. E., 1999. “Modern Physical Metallurgy and Materials Engineeringâ€. Sixth Editions. Smallman & Bishop. Reed Educational and Professional Publishing Ltd, 1999.
Somesi, L.Y., 2018. “Study on Tensile Properties of Salak Fiber (Salacca-Zalacca) Reinforced Calcium Carbonate/Epoxy Hybrid Compositesâ€. Mechanical Engineering. Faculty of Engineering. Universitas Gadjah Mada. Yogyakarta. Juni, 2018.
Sunardi, dkk, 2017.†Pengaruh Butiran Filler Kayu Sengon terhadap Karakteristik Papan Partikel yang Berpenguat Serat Tandan Kosong Kelapa Sawitâ€. Teknik Mesin. Universitas Sultan Ageng Tirtayasa. Cilegon. Juni, 2017.
Udur, 1. J. H, 2014.â€Sifat Mekanik Komposit Fiber Glass dengan Penguat Serat Sabut Buah Kelapa Sawit Berorientasi Presentase Jumlah Serat secara Randomâ€. Jurusan Teknik Mesin, Politeknik Medan. Januari, 2014.
