Rancang Bangun Mesin Pengupas Sabut Kelapa Menggunakan Variasi Roller Blade
Keywords:
coconut coir design, wedge, angle 0o and 5oAbstract
Coconut is a type of plant from the Arecaceae and the sole member of the margos. This plant lives in tropical areas such as in Indonesia. West Kalimantan, which is one of the islands that has a large area, has the potential for the utilization of this coconut. This potential is utilized as in export needs, but due to the use of traditional technology, namely using a wedge in stripping coconut husk, there is often a delay in the export process, so technology such as a coconut husk peeler with electric power is needed which aims to obtain more stripping time. fast. The research method in the design is done by reading the literature, observation, experimental and descriptive by varying the blade with an angle of 0o and 5o in order to obtain maximum results. Coconuts whose husks are peeled using a coir peeler design with variations in angles have a peeling machine capacity of 333 pieces/hour and 383 pieces/hour. This result is greater when compared to using a wedge with an average stripping time of 180 pieces/hour, so it has a percentage of 0o of 185% and 5o of 212.78% higher, so it can help increase production and help in handling the export process.
References
Alridho, A, Syawaldi dan Anwar, I. (2018). Perencanaan Mesin Pengupas Sabut Kelapa Dengan Menggunakan Mata Pisau Miring. Journal REM: Renewable Energi and Mechanics, 1(02), hal:23-39.
Ardiansyah, W. R. F. (2016). Perencanaan Dan Perhitungan Transmisi Pada Mesin Pengaduk Tipe Horizontal Berkapasitas 60 Kg/ Jam. Surabaya. Tugas Akhir Fkultas Teknik Industri Institut Teknologi Sepuluh November.
Badan Pusat Statistik. (2021). Luas Tanaman Perkebunan Menurut Provinsi (Ribu Hektar), 2018-2020. (BPS-Statistics Indonesia).
Coelli, T.J., Rao, D.S.P., dan Battese (1998). An Introduction to Efficiency and Productivity Analysis. London : Springer.
Feryanto, A. N. (2017). Perancangan Mesin Pengerol Pipa Galvanis Dengan Dua Penekan Ulir Handle. Malang. Tugas Akhir Jurusan Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Malang.
Gere, J. M., S. P. Timoshenco. (1997). Mechanics Of Material. 4th Edition. Cole Publiation. California. Terjemahan B. Suryoatmono. (2000). Mekanika Bahan. Jakarta: Erlangga.
Hasyim, F. (2020). Analisis Kekuatan Struktur Pada Desain Mesin Pembubur Kertas Menggunakan Finite Element Analysis Software CATIA V5R19. Semarang: Skripsi Program Studi Teknik Mesin, Universitas Negeri Semarang.
Indahyani, T. (2011). Pemanfaatan limbah sabut kelapa pada perencanaan interior dan furniture yang berdampak pada pemberdayaan masyarakat miskin. Binus Journal Publishing : Humaniora, Vol 2(1), hal: 15-23.
Irawan, A. P. (2015). Diktat Elemen Mesin. Jakarta : Jurusan Teknik Mesin Fakultas Teknik Universitas Tarumanegara.
Khurmi, R.S. dan Gupta, J.K. (2005). Text Book Of Machine Design Eurasia, Publishing House, ltd Ram Nagar, New Delhi.
Mott, R. L. (2004). Machine Elements In Mechanical Design. Terjemahan Rines, A.U. Santoso, W. Kusbandono, R, Sambada, I.G.K. Puja, dan A.T. Siswantoro. (2009) Elemen-Elemen Mesin Dalam Perancangan Mekanis. Yogyakarta: ANDI.
Norita, D., Junaedi, D., Hutasit, J. dan Wijaningrum, P. (2018). Pengukuran Waktu Baku Proses Mixing, Filling Dan Packing Mood Lipstick Menggunakan Metode Pengukuran Waktu JAM HENTI di PT.X. Jurnal Teknoris, vol.12 No.1.
Qorianjaya, Y. (2017). Perancangan Pulley Dan Sabuk Pada Mesin Mixer Garam Bleng. Surakarta :Proyek Akhir Program Diploma Tiga Teknik Mesin Fakultas Teknik, Universitas Sebelas Maret.
Mott, R. L. (2004). Machine Elements In Mechanical Design. Terjemahan Rines, A.U. Santoso, W. Kusbandono, R, Sambada, I.G.K. Puja, dan A.T. Siswantoro. (2009) Elemen-Elemen Mesin Dalam Perancangan Mekanis. Yogyakarta: ANDI.
Sholih, S. (2018). Perancangan Mesin Pengupas Serabut Kelapa Kapasitas 100 Biji/Jam. Malang. Tugas Akhir Jurusan Teknik Mesin Universitas Muhammadiyah Malang.
Sutrisno, T. (2017). Desain Geometri Open Pulley System 4 Tingkat Pada Unit Mesin Penggerak Turbin Uap Dan Generator Untuk Steam Power Generation (Longitudinal Coil Water Tube Boiler).Palembang.Tugas Akhir Jurusan Teknik Kimia Politeknik Negeri Sriwijaya.
