Analisis Perbandingan Kekuatan Tarik Dalam Penyambungan Belt Conveyor Antara Metode Cold Splicing dan Metode Hot Splicing Pada PLTU Kalbar-1 PT. GCL Indo Tenaga -Bengkayang
Keywords:
hot splicing, cold splicing, ASTM D3039, belt conveyor, tensile strengthAbstract
In the industrial world, many companies still use conveyor belts for distribution and production some products. One of the industries that uses conveyor belts to date is the power generation industry, especially power plant that use coal as fuel. The power plant still uses coal as fuel is Steam Power Plant (PLTU). The type of conveyor belt most widely used in PLTU throughout Indonesia is Fire Resistance type belt (FR/DIN K/JIS K). This conveyor belt is a rubber type. Usually, for installing conveyor belts, several connection methods are used for carcass fabric types. In several PLTU methods, the most frequently used connection methods are cold splicing and hot splicing. However, the problem that often occurs with conveyor belts is broken connections. This research was conducted to find out the best connection between cold splicing or hot splicing. The standard for making test samples uses ASTM D3039 standard. Where in connecting the two methods, the thickness of the glue and the gluing time are varied. Variations in glue thickness were 0.2 mm, 0.4 mm and 0. 6mm. Meanwhile, the gluing time varies, namely 10 minutes, 20 minutes and 30 minutes. The result of tensile tests carried out on all test samples showed that the best value was hot splicing with a thickness 0.2 mm and a gluing time 10 minutes.
References
Awal, M. M., & Safaruddin. (2022). Penggantian Belt Conveyor Menggunakan Metode Cold Splicing pada 24BC-21 Area Cement Mill di PT. Semen Baturaja (Persero) Tbk. Jurnal Lintas Ilmu, Vol 1(1), hal: 92-102.
Bailay, S. J., Baldini, N. C., & Emery, S. (2010). Annual Book of ASTM Standards. West Conshohocken: ASTM International.
Bazda, M., Blazej, R., & Hardygora, M. (2018). Optimizing Splice Geometry in Multiply Conveyor Belts with Respect to Stress in Adhesive Bonds. Jounal Mining Science, Vol. 25, hal: 195-206.
Dechev, N., Mills, J. K., & Cleghorn, W. L. (2004). Mechanical Fastener Designs For Use In The Microassembly Of 3d Microstructures. Proceedings of IMECE (hal. 1-11). California: ASME International Mechanical Engineering Congress and RD&D Expo.
Erinofiardi. (2012). Analisa Kerja Belt Conveyor 5857-V Kapasitas 600 Ton/Jam. Jurnal Rekayasa Mesin, Vol. 3(3), hal: 450-458.
Handbook, M. (1997). Polymer Matrix Composites Volume I. Guidelines. Washington D.C.: Department of Defense Washington D.C.
Jati, A. S., Prawatya, Y. E., & Wicaksono, R. A. (2021). Karakterisasi Pengaruh Orientasi Serat Terhadap Sifat Fisis Komposit Serat Tandan Kosong Kelapa Sawit Dengan Perlakuan Alkali (NaOH). Jurnal Teknologi Rekayasa Teknik Mesin, Vol. 2(1), hal: 6-12.
Muhammad, M., Arbiantara, H., & Adib, A. (2015). Pengaruh Suhu dan Waktu Terhadap Kekuatan Tarik dengan Pengujian Termal Mekanis pada Belt Conveyor 2 ply. Jurnal ROTOR, Vol. 8(1), hal: 2-4.
Nurrahmat, F., & Safaruddin. (2022). Analisa Kerusakan Belt Conveyor dan Proses Penyambungan Belt Conveyor 23BC-04 Limestone Raw Mill di PT. Semen Baturaja (Persero) Tbk. Multidisipliner Bharasumba, Vol. 1(3), hal: 498-511.
Ozgur, Ozturk, & Yayinlari, D. (2015). 3RD International Chemical Engineering and Chemical Technologies Conference Proceedings. Chemtech'15 (hal. 1-228). Beyoglu, Instanbul: DAKAM.
Wibowo, S. S., Manaf, A., & Umar, T. (2021). Analisis Pembebanan Belt Conveyor Menggunakan Motor Induksi 3 Fase 1,5 Kw dan VSD Sebagai Speed Controller. Jurnal Teknik Ilmu dan Aplikasi, Vol 9(1), hal: 91-96.
