CORRELATION OF BASED SOIL CARRYING CAPACITY RESULTS OF CONE PENETRATION TEST, DYNAMIC CONE PENETROMETER (DCP), PLATE BEARING TEST, AND HAND PENETROMETER

Authors

  • Ponsianus Kameistu University of Tanjungpura
  • Eka Priadi University of Tanjungpura
  • Slamet Widodo University of Tanjungpura

DOI:

https://doi.org/10.26418/jts.v23i3.64107

Keywords:

Soil Bearing Capacity, Correlation, Dynamic Cone Penetrometer, Hand penetrometer, Plate Running test, Soil test

Abstract

Several testing methods can be carried out in testing the bearing capacity of the soil, such as soil test testing, hand penetrometer, dynamic cone penetrometer, plate bearing test, and others. In addition to direct testing in the field, testing can also be carried out in the laboratory. The purpose of this study is to determine how much the correlation results of the 4 (four) test methods are to provide efficient results in data collection in the field. The location of research was carried out in Sekadau Regency, Sekadau Hilir District. The Sports Stadium Complex Development Plan has carried out as many as 20 (twenty) points for each test. Each test was carried out closely and reviewed at a depth of one meter, with soil characteristics at The test location being sandy soil with fine grain. The correlation test was carried out with 4 (four) test methods using the regression line method. This study shows a solid correlation between CBR Dynamic Cone and Hand Penetrometer (r = 0.893). The strong correlation between Hand Penetrometer and the qc Soil test (r = 0.669). Good modulus subgrade (Plate Bearing Test) correlation with CBR Dynamic Cone Penetrometer (r = 0.417). Very weak correlation of Soil test qc with subgrade modulus (Plate Bearing Test (r = 0.226).

Author Biographies

Eka Priadi, University of Tanjungpura

Tanjungpura University

Slamet Widodo, University of Tanjungpura

Tanjungpura University

References

Akadiri, P.,O.;Chinyio, E., A.; Olomolaiye, P.O. (2012). Design of A Sustainable Building: A Conceptual Framework for Implementing Sustainability in the Building Sector. Buildings 2012, 2(2), 126-152; https://doi.org/10.3390/buildings 2020126.

Asnaning, A., R.; Wisman, M.; Balqis, T., A. (2021). Identifying Soil Bearing Capacity for Polinela's New Campus Road Trace Planning using Dynamic ConePenetrometer Test. International Conference On Agriculture and Applied Science (ICoAAS) 2021. https://doi.org/10. 25181/ icoaas.v2i2.2477.

Bünemann, E., K.; Bongiorno, G.; Bai, Z.; Creamer, R., E.; De Deyn, G.; de Goede, Ron G.M.; Fleskens, L.; Geissen, V.; Kuyper, T., W.; Mäder, P.; Pulleman, M.; Sukkel, W.; Van Groenigen, J., W.; Brussaard, L. (2018). Soil quality – A critical review. Soil Biology and Biochemistry. Volume 120, May 2018, Pages 105-125. https://doi.org/10.1016/ j.soilbio.2018.01.030.

Flamingo, A.; Bosco, M.; Massimino, M., R. (2022). The role of soil in structure response of a building damaged by the 26 December 2018 earthquake in Italy. Journal of Rock Mechanics and Geotechnical Engineering, Volume 15, Issue 4, April 2023, Pages 937-953.

Hamid., A., M. (2015). The Dynamic Cone Penetration Test: A Review Of Its Correlations And Applications. International Conference on Advances in Civil and Environmental Engineering 2015.

Kaakkurivaara T., Vuorimies N., Kolisoja P., Uusitalo J. (2015). Applicability of portable tools in assessing the bearing capacity of forest roads. Silva Fennica vol. 49 no. 2 article id 1239. 26 p.

Patel, A. (2019). Geotechnical Investigations and Improvement of Ground Conditions. Woodhead Publishing. ISBN 978-0-12-817048-9. https://doi.org/10.10 16 / C2018-0-01307-9

Sánchez-Garrido, A.J.; Navarro, I.,J.; Yepes, V. (2022). Evaluating the sustainability of soil improvement techniques in foundation substructures. Journal of Cleaner Production. Volume 351, 1 June 2022, 131463. https://doi.org/10.1016/ j.jclepro.2022.131463

Helmi; Aprianto; Bachtiar, V. 2015. Korelasi Nilai California Bearing Ratio (CBR) Lapangan Dengan Menggunakan Alat Dynamic Cone Penetrometer (DCP) dan California BearingRatio (CBR) Mekanis. JeLAST : Jurnal PWK, Laut, Sipil, Tambang, 1(1). http://dx.doi.org/10.26418/jelast.v1i1.13977.

Hariandy, M.T, Aprianto, Faisal, A. 2016. Korelasi Nilai MP Berdasarkan Pengujian MACKINTOSH PROBE Dengan Nilai Qc Sondir (CONE PENETRASIOAN TEST). JeLAST : Jurnal PWK, Laut, Sipil, Tambang, 1(1). http://dx.doi.org/10.26418/jelast.v1i1.14508.

Achmad, F. 2009. KORELASI NILAI HAMBATAN KONUS (QC) DAN CBR LAPANGAN PADA TANAH LEMPUNG DESA IMBODU. Dinamika TEKNIK SIPIL, 11(1). http://hdl.handle.net/11617/1934.

Soewignjo, A.N, Yusa, M. Satibi, S. 2019. Value Estimation of California Bearing Ratio from Hand Cone Penetrometer Test for Pekanbaru Soils. Jurnal Teknik Sipil Insititut Teknologi Bandung, 26(1). https://doi.org/10.5614/jts.2019.26.1.4.

Padagi, E.N. Priadi, E. Aprianto. 2014. Korelasi Nilai N-SPT Terhadap Sifat-sifat Fisik dan Mekanis Tanah. JeLAST : Jurnal PWK, Laut, Sipil, Tambang, 1(1). http://dx.doi.org/10.26418/jelast.v1i1.10244.

Rahmawati, A., Zaika, Y., Suryo, E.A. (2014). Perbandingan Modulus Reaksi Subgrade Berdasarkan Uji CBR Terhadap Hasil Uji Beban Pelat (Studi Kasus: Perencanaan Perkerasan Kaku). Jurnal Mahasiswa Jurusan Teknik Sipil, 1(1). http://sipil.studentjournal.ub.ac.id/index.php/jmts/article/view/15.

Christandy, Y. Pranantya, N.D. (2017). Kajian Nilai Modulus Reaksi Subgrade Dan Nilai CBR Berdasarkan Pengujian Di Laboratorium. G-SMART : Jurnal Teknik Sipil, 1(1). https://doi.org/10.24167/gs.v1i1.924.

Ardianto, Y. Setyanto. Iswan. 2017. Menentukan Nilai CBR Menggunakan Alat DCP Dalam Grafik dan Persamaan Fungsi. Jurna Rekayasa Sipil dan Desain (JRSDD), 5(3). https://journal.eng.unila.ac.id/index.php/jrsdd/article/view/741.

Downloads

Published

2023-08-27