Selection of Effective Column Configuration in Nahdlatul Ulama University Flat in Kalimantan Barat Province

Authors

  • Teresa Vonia Department of Civil Engineering, Tanjungpura University
  • M. Yusuf Department of Civil Engineering, Tanjungpura University
  • Yoke Lestyowati Department of Civil Engineering, Tanjungpura University

DOI:

https://doi.org/10.26418/jts.v24i3.86218

Keywords:

Structural Analysis, Interaction Diagram, Circular Column, Rectangular Column, Square Column

Abstract

This study analyzes the structural performance of square, rectangular, and circular columns in the Nahdlatul Ulama University Flat (UNU Flat), Kubu Raya, West Kalimantan. Data included structural designs, seismic analysis, and specifications. Using interaction diagrams, square columns (400 x 400 mm, 12D16) demonstrated sufficient axial and bending load capacities, handling up to 2,500 kN and 200 kNm. Replacing them with circular columns (300 mm diameter) reduced the cross-sectional area but maintained safety. Rectangular columns (400 x 550 mm, 14D16) also showed strong load resistance with safe interaction points. Substituting these with circular columns (500 mm diameter) preserved structural safety. All column configurations met load and safety requirements, with circular columns offering potential material efficiency and more straightforward construction. The results confirm stability and strength under varying loads, emphasizing the feasibility of circular columns for optimized performance.

References

Adam, J. M., Buitrago, M., Bertolesi, E., Sagaseta, J., & Moragues, J. J. (2020). Dynamic Performance of A Real-Scale Reinforced Concrete Building Test Under A Corner-Column Failure Scenario. Engineering Structures, 210, 110414.

Ala, B., Elvira, E., & Faisal, F. (2023). Perhitungan Struktur Bangunan Gedung Kantor di Kabupaten Mempawah. JeLAST: Jurnal PWK, Laut, Sipil, Tambang, 10(3).

Ayough, P., Ibrahim, Z., Sulong, N. R., & Hsiao, P. C. (2021). The Effects of Cross-Sectional Shapes on The Axial Performance of Concrete-Filled Steel Tube Columns. Journal of Constructional Steel Research, p. 176, 106424.

Cai, Y., Su, M., Chen, X., & Young, B. (2021). Strength Steel Square and Rectangular Tubular Stub Columns Infilled with Concrete. Journal of Constructional Steel Research, p. 179, 106536.

Elchalakani, M., Dong, M., Karrech, A., Mohamed Ali, M. S., & Huo, J. S. (2020). Circular Concrete Columns and Beams Reinforced with Gfrp Bars and Spirals Under Axial, Eccentric, And Flexural Loading. Journal of Composites for Construction, 24(3), 04020008.

Gautham, A. S. D. R., & Sahoo, D. R. (2021). Behavior of Steel-Reinforced Composite Concrete Columns under Combined Axial and Lateral Cyclic Loading. Journal of Building Engineering, p. 39, 102305.

Gzara, F., Elhedhli, S., & Yildiz, B. C. (2020). The Pallet Loading Problem: Three-Dimensional Bin Packing with Practical Constraints. European Journal of Operational Research, 287(3), 1062-1074.

Kong, D. Y., Yang, B., Elchalakani, M., Chen, K., & Ren, L. M. (2020). Progressive Collapse Resistance of 3D Composite Floor System Subjected to Internal Column Removal: Experiment and Numerical Simulation. Journal of Constructional Steel Research, 172, 106208.

Lai, B., & Liew, J. R. (2020). Design and Testing of concrete-encased steel Composite Beam-Columns with C90 Concrete and S690 Steel Section. Engineering structures, 220, 110995.

Lunardi, F., Aryanto, A., & Yusuf, M. (2024). Design of 8-Story Reinforced Concrete Structure of Wangguh Apartment Pontianak Building with Comparison of Beam Review. Jurnal Teknik Sipil, 24(1), 736-752.

Marpahiko, G., & Sutandar, E. (2021). Kalkulasi Analisis Struktur Desain Beban Gempa Dan Performanya Terhadap Beban Ledakan Pada Gedung Bri Cabang Pontianak. JeLAST: Jurnal Teknik Kelautan, PWK, Sipil, dan Tambang, 8(2).

Rahmanto, F., Elvira, E., & Supriyadi, A. (2023). The Calculation Of The Building Structure Of Institut Teknologi Dan Bisnis Sabda Setia Kota Pontianak. Jurnal Teknik Sipil, 23(1), 1-14.

Simanjuntak, J. O., & Harefa, H. P. (2021). Analisis Perbandingan Kolom Persegi dan Kolom Bulat dengan Mutu Beton, Luas Penampang dan Luas Tulangan yang Sama. Jurnal Construct, 1(1), 11-24.

Utami, D.D.; Lestyowati, Y; Budi, G.S. (2021). Perencanaan Struktur Tahan Gempa Gedung Laboratorium Universitas Tanjungpura Pontianak. JeLAST: Jurnal Teknik Kelautan, PWK, Sipil, dan Tambang, 2021, 8.2.

Venkateshwaran, A., Lai, B. L., & Liew, J. R. (2022). Buckling Resistance of Steel Fibre-Reinforced Concrete Encased Steel Composite Columns. Journal of Constructional Steel Research, p. 190, 107140.

Downloads

Published

2024-11-27

Issue

Section

Vol 24, No 3 (2024): Vol 24, No 3 (2024): JURNAL TEKNIK SIPIL EDISI AGUSTUS 2024