Implementation of Special Moment Resisting Frame for the Design Structure of a Seven-Story Academic Building in Pontianak
DOI:
https://doi.org/10.26418/jts.v25i1.89035Keywords:
Lecture Building Design, Reinforced Concrete Structure, Special Moment Bearing Frame System.Abstract
Education is fundamental to human development, enabling individuals to cultivate logical thinking and continuously evolve, fostering positive behaviors and attitudes. This is especially crucial for the younger generation today. The increasing development and construction of lecture buildings in Pontianak City significantly support education and intellectual growth. Lecture buildings are designed as multi-story structures to address land limitations while accommodating large capacities. The structural design of a seven-story earthquake-resistant lecture building in Pontianak City utilizes a reinforced concrete structure and follows the Structural Concrete Requirements for Buildings and Explanations (SNI 2847:2019) and the Earthquake Resistance Planning Procedures for Building and Non-Building Structures (SNI 1726:2019). The structural system is planned using a Moment Resisting Frame System, considering seismic forces in the design process. Given that the Seven-Storey Lecture Building falls under Seismic Design Category (KDS) D, the appropriate seismic force-resisting system employed is the Special Moment Resisting Frame System (SRPMK) to ensure structural integrity and earthquake resilience.
References
Ala, B., Elvira, E., & Faisal, F. (2023). Perhitungan Struktur Bangunan Gedung Kantor di Kabupaten Mempawah. JeLAST, 1–6.
AlHamaydeh, M., Abdullah, S., Hamid, A., & Mustapha, A. (2011). Seismic design factors for RC special moment resisting frames in Dubai, UAE. Earthquake Engineering and Engineering Vibration, 10, 495-506.
Al Jauhari, Z., Nur, A. K., Fitrah, R. A., & Apriwelni, S. (2021). Comparative study of SNI 1726: 2012 and SNI 1726: 2019 guidelines for response spectrum 2D method (study case: GKT II building of Bengkalis State Polytechnic). In E3S Web of Conferences (Vol. 331, p. 05004). EDP Sciences.
Amin, U. M. K., Yusuf, M., & Elvira, E. (2023). Design Of Earthquake-Resistant Reinforced Concrete Structure of an Eight-Storey Flats In Pontianak City. Jurnal Teknik Sipil, 23(4), 479–487.
Badan Standardisasi Nasional. (2019). SNI 1726:2019 Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Nongedung. Jakarta.
Badan Standarisasi Nasional. (2019). SNI 2847:2019 Persyaratan Beton Struktural untuk Bangunan Gedung. Jakarta.
Badan Standarisasi Nasional. (2020). SNI 1727:2020 Beban Minimum untuk Perencanaan Bangunan Gedung dan Struktur Lain. Jakarta.
Grigorian, M., & Kamizi, M. (2022). High-performance resilient earthquake-resisting moment frames. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 175(5), 401-417.
Hardiyatmo, H. C. (2010). Analisis dan Perancangan Fondasi (Bagian II). Yogyakarta: Gadjah Mada University Press.
Lesmana, Y. (2020). Handbook Prosedur Analisa Beban Gempa Struktur Bangunan Gedung Berdasarkan SNI 1726:2019. Makassar: Nas Media Pustaka.
Lesmana, Y. (2020). Handbook Desain Struktur Beton Bertulang Berdasarkan SNI 2847:2019. Makassar: Nas Media Pustaka.
Lesmana, Y. (2021). Handbook Analisa Dan Desain Struktur Tahan Gempa Beton Bertulang (SRPMB, SRPMM, & SRPMK) Berdasarkan SNI 2847:2019 & 1726:2019. Makassar: Nas Media Pustaka.
Lubis, F., & Apriani, W. (2024). Evaluation of building structure planning using SNI 1726: 2019 and SNI 2847: 2019 in earthquake-prone areas. In IOP Conference Series: Earth and Environmental Science (Vol. 1321, No. 1, p. 012024). IOP Publishing.
Lunardi, F., Aryanto, A., & Yusuf, M. (2024). Design Of 8-Story Reinforced Concrete Structure Of Wangguh Apartment Pontianak Building With Comparison Of Beam Review. Jurnal Teknik Sipil, 24(1), 736–752.
Patria, A. S. N., Dewi, K., & Krisdiyanto, A. (2022). Perbandingan Nilai Parameter Spektrum Respons Desain Sni 1726: 2012 Dan Sni 1726: 2019 Pada Kecamatan-Kecamatan Di Kabupaten Bantul Yogyakarta. Jurnal Kacapuri: Jurnal Keilmuan Teknik Sipil, 5(1), 33-41.
Pratiwi, A., Supriyadi, A., & Faisal, F. (2021). Perencanaan Struktur Beton Bertulang Gedung 7 Lantai Tahan Gempa Lokasi Jalan Letjend Suprapto Kota Pontianak. Jurnal Universitas Tanjungpura Pontianak, 1–8.
Puspabella, F., Sutandar, E., & Yusuf, M. (2022). Perhitungan Struktur Beton Bertulang Gedung 7 Lantai Sekolah Santu Petrus dengan Sistem Rangka Pemikul Momen. JeLAST, 3, 1–9.
Rahmanto, F., Elvira, E., & Supriyadi, A. (2023). The Calculation of The Building Structure of Institut Teknologi Dan Bisnis Sabda Setia Kota Pontianak. Jurnal Teknik Sipil, 23(1), 1-14.
Sharma, V., Shrimali, M. K., Bharti, S. D., & Datta, T. K. (2021). Seismic fragility evaluation of semi-rigid frames subjected to near-field earthquakes. Journal of Constructional Steel Research, 176, 106384.
Sutiono, T., Budi, G. S., & Herwani, H. (2023). Calculation Of Earthquake Resistant Structure Of Medical Center Building Rumah Sakit Umum Daerah (RSUD) Soedarso Pontianak Using Pushover Analysis. Jurnal Teknik Sipil, 23(3), 337-349.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
