Utilization of Styrofoam Waste as an Additive in AC-BC Mixture with Variations in Compaction Temperature

Authors

  • Gabriel Julio Theovani Department of Civil Engineering, University of Tanjungpura
  • Heri Azwansyah Department of Civil Engineering, University of Tanjungpura
  • Siti Mayuni Department of Civil Engineering, University of Tanjungpura

DOI:

https://doi.org/10.26418/jts.v25i3.90468

Keywords:

Styrofoam, Asphalt Concrete "“ Binder Course (AC-BC), Compaction Temperature, Marshall Characteristics

Abstract

Styrofoam, a polystyrene-based plastic widely used in packaging, poses serious environmental challenges due to its non-biodegradable nature. Its use as an additive in asphalt mixtures provides dual benefits: reducing plastic waste and improving pavement performance. This study evaluates the effects of styrofoam addition and variations in compaction temperature on the Marshall characteristics of Asphalt Concrete"“Binder Course (AC"“BC). The research included testing the physical properties of aggregates and asphalt, determining the optimum asphalt content (OAC) using the Barchart method in accordance with Bina Marga Specifications 2018, Revision II, and preparing mixtures with styrofoam contents of 0%, 3%, 6%, and 9%. Samples were compacted at 110 °C, 125 °C, and 140 °C, then tested using the Marshall method to analyze stability, flow, and void-related parameters. Results showed an OAC of 5,6%. Higher styrofoam content and compaction temperature generally improved mixture stability. The highest stability value, 1.152,2 kg, was achieved at a 9% styrofoam content and a compaction temperature of 140 °C. These findings indicate that styrofoam enhances structural strength by filling voids without significantly reducing flexibility. Therefore, styrofoam has strong potential as an eco-friendly additive to improve asphalt performance while helping reduce plastic waste.

References

Al Ambia, I., Syarwan, S., & Ar, S. (2022). Pengaruh Penambahan Styrofoam terhadap Material Reclaimed Asphalt Pavement (RAP) sebagai Campuran Asphalt Concrete-Binder Course (AC–BC). Jurnal Sipil Sains Terapan, 5(02), 21-28.

Amiruddin, Filantropie, N. A., Ramadhani, S. L., & Artini, S. R. (2023). Pemanfaatan Limbah Styrofoam sebagai Bahan Tambah Asphalt Concrete-Wearing Course (AC-WC) dengan Variasi Suhu Pencampuran. Pilar Jurnal Teknik Sipil Politeknik Negeri Sriwijaya 18(1): 1–7.

Amrullah, D. (2024). Pengaruh Penggunaan Limbah Styrofoam untuk Bahan Aditif pada Asphalt AC-BC. Undergraduate Thesis: University of Muhammadiyah Mataram.

Briyandono, V. (2017). Karakteristik Campuran Aspal Porus dengan Penambahan Styrofoam (Characteristics of Porous Asphalt Mixture with Addition of Styrofoam). Undergraduate Thesis: University of Islam Indonesia.

Çetin, M., Altera, A. Z. A., & Bayraktar, O. Y. (2019). Advanced Road Materials Highway Infrastructure and Features. Kastamonu University Journal of Engineering and Sciences, 5(1), 36-42.

Dinanti, P. S., Siregar, S. A., & Putri, F. E. (2024). Faktor-Faktor yang Berhubungan dengan Perilaku Penggunaan Styrofoam sebagai Kemasan Makanan pada UMKM Sektor Makanan di Kota Jambi Tahun 2023. Jurnal Kesmas Jambi, 8(1), 38-47.

Faraknimela, E., & Selintung, M. (2022). Penggunaan Styrofoam sebagai Bahan Tambah Campuran AC-BC Menggunakan Batu Sungai Pucak Kabupaten Maros. Paulus Civil Engineering Journal, 4(4), 687-697.

Hidayat, R., Iqbal, M., Atipah, R., & Sembiring, F. (2020). Implementasi Algoritma AHP untuk Menentukan Prioritas Infrastruktur Jalan. In Seminar Nasional Informatika (SEMNASIF), 1(1), 362-371.

Karyawan, I. D. M. A., Widianty, D., & Febriana, A. (2025). Potensi Pemanfaatan Limbah Plastik HDPE sebagai Bahan Aditif untuk Meningkatkan Kinerja Perkerasan AC-BC. Jurnal Kridatama Sains dan Teknologi, 7(01), 468-479.

Kuncoro, E., Wurarah, R. N., & Erari, I. E. (2024). The Impact of Road Infrastructure Development on Ecosystems and Communities. Social, Ecology, Economy for Sustainable Development Goals Journal, 1(2), 78-90.

Kurniasari, F. D., Ruslaini, & Mahyar, H. (2022). Pemanfaatan Limbah Styrofoam untuk Substitusi Aspal Pen 60/70 pada Laston dengan Metode Pencampuran Basah dan Kering. Serambi Engineering, VII(1), 2625-2630.

Lebang, J. R., & Rachman, R. (2022). Pengaruh Penambahan Limbah Styrofoam terhadap Karakteristik Campuran AC-WC. Paulus Civil Engineering Journal, 4(2), 289-297.

Nasot, M., & Muis, A. (2022). Pengaruh Penambahan Styrofoam terhadap Karakteristik Marshall pada Lapisan Aspal Beton AC-WC. Jurnal Karajata Engineering, 2(2), 10-18.

Paerunan, R. S., & Ismaili, A. F. (2018). Pengaruh Variasi Temperatur Pemadatan dengan Suhu 115°C, 120°C, 125°C, 130°C, terhadap Kinerja Perkerasan Aspal. Undergraduate Thesis: University of Technology Yogyakarta.

Pandey, S. V., & Lalamentik, L. (2014). Kelas Jalan Daerah untuk Angkutan Barang. Tekno, 12(60), 27-37.

Putra, M. P., Hendrowidarto, & Hamka. (2023). Analisis Pemanfaatan Plastik Polystyrene (PS) sebagai Bahan Tambahan Aspal AC-WC dan AC-BC dengan Metode Marshall. Jurnal Karajata Engineering, 3(2), 91-95.

Raharjo, B., Pratomo, P., & Ali, H. (2016). Pengaruh Suhu Pemadatan Campuran untuk Perkerasan Lapis Antara (AC-BC). Jurnal Rekayasa Sipil dan Desain, 4(1), 43-50.

Rondonuwu, F., Kaseke, O. H., Rumajar, A. L. E., & Manoppo, M. R. E. (2013). Pengaruh Sifat Fisik Agregat terhadap Rongga dalam Campuran Beraspal Panas. Jurnal Sipil Statik, 1(3), 1-6.

Sambo, N., & Rachman, R. (2021). Pemanfaatan Limbah Styrofoam sebagai Bahan Tambah Campuran AC-BC yang Menggunakan Sungai Bittuang. Paulus Civil Engineering Journal, 3(3), 330-340.

Sampe, D. N., Alpius, & Elizabeth. (2022). Pengaruh Styrofoam Sebagai Bahan Tambah Campuran AC-BC Batu Sungai Tetean Kabupaten Mamasa. Paulus Civil Engineering Journal, 4(2), 200-207.

Sulianti, I., Ibrahim, I., Subrianto, A., Monita, A., & Medici, M. (2019). Karakteristik Marshall pada Campuran Asphalt Concrete–Wearing Course (AC-WC) dengan Penambahan Styrofoam. In Forum Mekanika, 8(2), 51-62.

Susanti, P. D., & Sabardila, A. (2023). Pembangunan Jalan dan Jembatan Penghubung Akibat Bendungan Jlantah di Desa Tlobo dan Karangsari. Jurnal Administrasi Publik dan Pembangunan, 5(1), 57-71.

Susilowati, A., & Wiyono, E. (2019). Variasi Suhu Pemadatan pada Campuran Beton Aspal Menggunakan Bahan Tambah Anti Stripping. Construction and Material Journal, 1(1), 12-20.

Widayanti, A., Soemitro, R. A. A., Ekaputri, J. J., & Suprayitno, H. (2020). Analisis Pemanfaatan Zat Aditif pada Reclaimed Asphalt Pavement untuk Lapisan Beton Aspal. Jurnal Manajemen Aset Infrastruktur & Fasilitas, 4(1), 23-32.

Downloads

Published

2025-09-08

Issue

Section

Vol 25, No 3 (2025): Vol 25, No 3 (2025): JURNAL TEKNIK SIPIL EDISI AGUSTUS 2025