Implementation Evaluation of Occupational Health and Safety Management System (SMK3) Based on Government Regulation No. 50 of 2012 at PT Integrasi Aviasi Solusi
DOI:
https://doi.org/10.26418/jts.v25i4.91869Keywords:
Cargo, Job Safety Analysis (JSA), Occupational Health and Safety Management System (SMK3), Hazard Risk ManagementAbstract
PT Integrasi Aviasi Solusi is a service provider in the aviation industry covering ground handling, cargo, logistics, and operational support. Activities in the cargo segment involve a significant level of hazard risk, thereby requiring the implementation of an Occupational Health and Safety Management System (SMK3) in accordance with regulations. This study aims to evaluate the hazard risk levels at the Pontianak Branch Office, assess the implementation level of SMK3 in accordance with Government Regulation No. 50 of 2012, and provide recommendations for improving risk control strategies. The Research data were obtained through field observations, interviews, documentation, and the use of OHSMS checklists. Risk analysis was conducted using the Job Safety Analysis (JSA) method and the AS/NZS 4360:2004 standard, while the evaluation of OHSMS implementation employed a regulatory compliance instrument. The results identified 54 potential hazards, consisting of 34 low-risk and 20 medium-risk hazards. The evaluation of OHSMS implementation showed a compliance level of 97%, with 62 criteria fulfilled and two criteria unmet (3%). These findings indicate that the implementation of OHSMS in the cargo unit has been carried out effectively; however, improvements in certain aspects are still required to strengthen the effectiveness of risk control.References
Arisma, Y., & Mashabai, I. (2020). Analisa & Estimasi Penurunan Risiko dengan Job Safety Analysis Pada Departemen Warehouse di PT. Amman Mineral Nusa Tenggara. Jurnal Industri & Teknologi Samawa, 1(1), 22–33.
Arjuna, F. R. (2023). Analisis Risiko Kecelakaan Kegiatan Ramp Handling Pada PT. Gapura Angkasa di Bandar Udara Radin Inten II Lampung. Student Scientific Creativity Journal, 1(4), 299-309.
Azzahra, F., Nurlaili, E. P., & Ratisan, J. D. (2022). Analisis Risiko Kerja Menggunakan Job Safety Analysis (JSA) dengan Pendekatan Hazard Identification, Risk Assessment and Risk Control (Hirarc) di PT Indo Java Rubber Planting Co. Jurnal Agrifoodtech, 1(1), 21–34.
Djaali, N. A., Usman, S., Agustino, R., & Simaibang, F. H. (2020). Penerapan Kesehatan dan Keselamatan Kerja (K3) melalui Sosialisasi Potensi Bahaya di Sekolah. Jurnal Pemberdayaan Komunitas MH Thamrin, 2(1), 34-43.
Hartanto, A., & Purwaningsih, R. (2016). Material Handling Cargo. Industrial Engineering Online Journal, 5(4), 1-6.
Herlangga, T. (2021). Analisis Kualitas Keselamatan dan Kesehatan Kerja (K3) pada Penanganan Kargo Maskapai Nam Air oleh PT. Avia Sejahtera Iskandar (ASI) di Bandar Udara Iskandar Pangkalan Bun Kalimantan Tengah. Doctoral Dissertation: STTKD Sekolah Tinggi Teknologi Kedirgantaraan Yogyakarta.
Jun, K., Yoon, B., Lee, S., & Lee, D. S. (2021). Factors Influencing Customer Decisions to Use Online Food Delivery Service During the COVID-19 Pandemic. Foods, 11(1), 64.
Khan, R. U., Yin, J., & Mustafa, F. S. (2021). Accident and Pollution Risk Assessment for Hazardous Cargo in a Port Environment. PLoS one, 16(6), e0252732.
Kurnianingtias, M. (2022). Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) dengan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) di Workshop Garmen Kampus Tekstil. Jurnal Tekstil: Jurnal Keilmuan Dan Aplikasi Bidang Tekstil Dan Manajemen Industri, 5(2), 77-87.
Kurnianingtias, M. (2022). Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) Dengan Metode Hazard Identification Risk Assessment and Risk Control (Hirarc) di Workshop Garmen Kampus Tekstil. Jurnal Tekstil: Jurnal Keilmuan dan Aplikasi Bidang Tekstil dan Manajemen Industri, 5(2), 77–87.
Lenaini, I. (2021). Teknik Pengambilan Sampel Purposive Dan Snowball Sampling. Historis: Jurnal Kajian, Penelitian & Pengembangan Pendidikan Sejarah, 6(1), 33–39.
Maulana, F. R., Pradana, R. K., Setiawan, M. I., Firmansyah, M. R., & Radianto, D. O. (2024). Analisis faktor-faktor yang mempengaruhi kecelakaan kerja di kapal perspektif K3. Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang Dan Teknik Sipil, 2(2), 181-188.
Nurhafifa, N., & Ariebowo, T. (2023). Application of Occupational Safety and Health in Cargo Handling by PT. Mulio Citra Angkasa at H. Asan Sampit Airport. Aurelia: Jurnal Penelitian dan Pengabdian Masyarakat Indonesia, 2(2), 1503–1511.
Nurrasjid, M. N. (2011). Penerapan Identifikasi Bahaya dan Manajemen Resiko Keselamatan di Bandar Udara Supadio-Pontianak. Warta Penelitian Perhubungan, 23(2), 163-170.
Pambudi, E. R., Nurhayati, S., & Sihombing, S. (2021). Marketing Strategy in an Effort to Improve the Quality of Cargo Services. Jurnal Manajemen Bisnis Transportasi Dan Logistik, 7(3), 199–206.
Pradana, B. A., Firmansyah, A. M. R., & Kalbuana, N. (2024). Pengaruh Disiplin Kerja dan Keselamatan Kerja Terhadap Efektivitas Kerja Personel Unit PKP-PK. Jurnal Riset Ilmu Kesehatan Umum dan Farmasi (JRIKUF), 2(3), 47-61.
Prayudhista, E., & Putri, A. A. (2022). Analisis Work Instruction Cargo Handling oleh PT Angkasa Pura Logistik pada Masa Pandemi Covid-19 di PT Angkasa Pura I Bandar Udara Internasional Yogyakarta. Jurnal Kewarganegaraan, 6(1), 851–857.
Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC). In Seminar Nasional Riset Terapan, November, 164-169.
Sahlan, A., Adisasmitha, S. A., & Aly, S. H. (2016). Analisis Prediksi Permintaan Kargo Udara pada Bandar Udara Internasional Sultan Hasanuddin. Jurnal Teknik Sipil, 1-11.
Sari, W. (2024). Rekomendasi Perbaikan Keselamatan dan Kesehatan Kerja Menggunakan Metode JSA Melalui Pendekatan Hiradc pada PT Sandang Asia Maju. Industrial Engineering Online Journal, 13(4), 1-9.
Selamat, S., Carlo, N., & Utama, L. (2025). Analisis Risiko terhadap Keselamatan dan Kesehatan Kerja dalam Proses Penggantian Katalis di Butane Treater di PT. X. Jurnal Talenta Sipil, 8(1), 466-477.
Sugiyono. (2013). Metode Penelitian Kuantitatif, Kualitatif, dan R & D (19th Ed.). Penerbit Alfabeta.
Wahyono, D., & Rifai, M. D. K., & Mukaromah. (2023). Analisis Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) pada Kegiatan Operasional Expedisi Muatan Pesawat Udara. E-logis: Jurnal Ekonomi Logistik, 5(2), 44-58.
Wahyuni, D. A. (2022). Analisis Implementasi Sistem Manajemen Keselamatan untuk Menghindari Terjadinya Hazard di Area Apron Bandar Udara Sultan Muhammad Kaharuddin III Sumbawa. Jurnal Kewarganegaraan, 6(3), 4887-4898.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
