The Effects of Quartz Sand Variation as an Additive on Concrete Compressive Strength (No Air Added)
DOI:
https://doi.org/10.26418/jts.v25i4.92086Keywords:
Quartz Sand, Concrete, Compressive Strength Enhancement, Aggregate Density, Mechanical Performance EvaluationAbstract
Concrete is a composite material widely used in construction due to its high compressive strength. However, variations in constituent materials can influence its quality and durability. One approach to improving concrete performance is to add quartz sand (SiO₂) as an additive. This study aims to analyse the effect of varying quartz sand content (0%, 5%, and 10%) on the compressive strength of non-air-entrained concrete. The research employed an experimental laboratory approach, producing cylindrical specimens cured for 28 days and tested using a compression testing machine in accordance with SNI 1974:2011. The test results showed that concrete with a 5% quartz sand addition achieved the highest compressive strength of 26.483 MPa, followed by regular concrete (26.087 MPa) and concrete with a 10% quartz sand addition (23.824 MPa). The results indicate that a moderate addition of quartz sand effectively enhances the compressive strength and density of concrete, whereas excessive dosage tends to increase porosity and reduce strength. Overall, 5% quartz sand is recommended as the optimal proportion to improve the performance of conventional concrete.References
Amahoru, T. M., Johnny, S. H., & Kakaly, S. (2022). Perencanaan komposisi campuran beton menggunakan agregat 10/20 dan 20/30. Journal Agregate, 1(1), 89-93.
Aryoputro, F. B., Teguh, M., & Saputra, E. (2022). Optimalisasi penggunaan pasir besi pengganti agregat halus dalam campuran beton mutu tinggi. Teknisia, 27(1), 24-33.
Budi, G. S., Sutandar, E., & Prasetijo, J. (2024). Compaction method's influence on mechanical and physical properties porous concrete. Revista de Gestão Social e Ambiental, 18(10), 1–18.
Gaus, A., Sultan, M. A., & Hakim, R. (2023). Efek penggunaan pasir batu apung sebagai pengganti sebagian agregat halus pada campuran beton ringan. Paduraksa: Jurnal Teknik Sipil Universitas Warmadewa, 12(1), 8-13.
Gea, P. M., Dohare, G. A., Zebua, M. K., Zebua, A. K., Zebua, D., & Ndruru, R. J. (2024). Pengaruh penambahan serat baja terhadap kuat tekan beton pada berbagai tingkat kepadatan. Jurnal Ilmu Ekonomi, Pendidikan dan Teknik, 1(1), 66-73.
Ghafarunnisa, D., Gingga, F., & Kurniawan, A. (2025). An identifikasi keterdapatan potensi bahan galian pasir kuarsa di kelurahan Padang, Kecamatan Sukamara, Kabupaten Sukamara. Jurnal Simetrik, 15(2), 120-127.
Hachemi, S., & Rahmouni, Z. E. (2022). A review on the effect of varied sand types in concrete at high temperature. J. Eng. Res. Sci, 1, 38–47.
Han, B., & Xiang, T. Y. (2017). Axial compressive stress-strain relation and Poisson effect of structural lightweight aggregate concrete. Construction and Building Materials, 146, 338-343.
Huwae, D. D., Tuanakotta, A., Tutupoho, I., & Uneputty, S. (2023). Pengaruh variasi temperatur air terhadap nilai kuat tekan beton. Journal Agregate, 2(2), 214–222.
Indrayadi, M., Rafie, Sutandar, E., & Faisal. (2022). The effect of the use of types sand on physical and mechanical properties of Reactive Powder Concrete (RPC). The International Journal of Engineering and Science (IJES), 11(2), 29–39.
Luo, F. J., He, L., Pan, Z., Duan, W. H., Zhao, X. L., & Collins, F. (2013). Effect of very fine particles on workability and strength of concrete made with dune sand. Construction and Building Materials, 47, 131–137.
Meddah, M. S., Zitouni, S., & Belâabes, S. (2010). Effect of content and particle size distribution of coarse aggregate on the compressive strength of concrete. Construction and Building Materials, 24(4), 505–512.
Nabila, L., Supriyadi, A., & Sutandar, E. (2023). Experimental study on increasing the characteristics of porous concrete with the addition of silica fume. SCIREA Journal of Civil Engineering and Building Construction, 8(4), 134–148.
Patria, A. S. N., & Haikal, F. (2022). Pengaruh kadar fly ash terhadap kuat tekan beton mutu tinggi menggunakan admixture high range water reducer. Jurnal Teknik Sipil, 15(2), 12–22.
Perdana, A. O., Wahyuni, A. S., & Elhusna, E. (2015). Pengaruh penambahan serat ijuk terhadap kuat tarik belah beton dengan faktor air semen 0,5. Jurnal Inersia, 7(2), 7–12.
Permana, M. I. H., Tahadjuddin, T., & Kurniawati, E. K. (2019). Pemanfaatan pasir kuarsa dan fly ash pada campuran laston AC-BC. Santika, 9(2), 969–978.
Polii, R. A., Sumajouw, M. D., Windah, R. S., Polii, R. A., Sumajouw, M. D. J., & Windah, R. S. (2015). Kuat tekan beton dengan variasi agregat yang berasal dari beberapa tempat di Sulawesi Utara. Jurnal Sipil Statik, 3(3), 206-211.
Powerija, C., Sutandar, E., & Supriyadi, A. (2024). The influence of aggregate size and compaction on void content and compressive strength of previous concrete. Jurnal Teknik Sipil, 24(2), 979–988.
Prabowo, A. R., & Sofia, D. A. (2024). Analisis pengaruh jenis pasir sebagai agregat halus terhadap kuat tekan beton. Akselerasi: Jurnal Ilmiah Teknik Sipil, 6(1).
Ramadhani, I., Oktavia, B., Sanjaya, H., & Putra, A. (2021). Penentuan kondisi optimum pembentukan Natrium Silikat (Na2SiO3) menggunakan material dasar silika alam dan Natrium Hidroksida (NaOH). J. Period, 10(2), 2.
Salim, D., Sutandar, E., & Supriyadi, A. (2023). Experimental study of the effect of coarse aggregate fine modulus (MHB) on the physical and mechanical properties of pervious concrete. International Journal of Advances in Engineering and Management (IJAEM), 5(11), 363.
Setiawan, A. A., & Wardhono, A. (2018). Pengaruh pasir kuarsa sebagai material pengganti semen pada campuran beton Self Compacting Concrete (SCC) terhadap kuat tekan dan porositas beton. Rekayasa Teknik Sipil, 1(1), 160-166.
Simanjuntak, J. O., Sidabutar, R. A., Pasaribu, H., Saragi, Y. R. R., & Sitorus, S. (2021). Sifat dan karakteristik campuran beton menggunakan batu pecah dan batu guli dari Sungai Binjai. Jurnal Visi Eksakta, 2(2), 239–254.
Slat, V. B., Supit, S. W., & Kondoj, N. (2021). Pengaruh superplasticizer polymer terhadap kuat tekan beton mutu tinggi. Wahana Teknik Sipil: Jurnal Pengembangan Teknik Sipil, 26(2), 115-123.
Supriyadi, A., & Sutandar, E. (2023). The porous concrete for rigid pavement. Civil and Environmental Engineering, 19(1), 48-58.
Sutandar, E., & Budi, G. S. (2024). Study of the effect of mineral admixture addition on paving blocks'physical and mechanical properties. Jurnal Teknik Sipil, 24(2), 941–956.
Syahda, W. S. A., Mustakim, M., & Misbahuddin, M. (2024). Analisis penggunaan pasir kuarsa dengan tambahan superplasticizer terhadap kapasitas kuat tekan dan tarik belah beton. Jurnal Karajata Engineering, 4(2), 143–150.
Yudi, E. F. (2025). Pengaruh penggunaan serat ijuk dengan penambahan superplasticizer terhadap kuat tarik belah beton implementasi mata kuliah praktek uji bahan. Jejak Digital: Jurnal Ilmiah Multidisiplin, 1(5), 3084-3094.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
