The Impact of Incorporating Varied Sand Powder on the Compressive Strength of Concrete (Including Air Addition)
DOI:
https://doi.org/10.26418/jts.v25i4.92395Keywords:
Sand Powder Substitution, Air-Entrained Concrete Mechanics, Compressive Strength Reduction, Concrete Microstructure and Porosity, Sustainable Aggregate UtilisationAbstract
Concrete is a primary construction material composed of a mixture of aggregates, cement, and water, where the proportion of each component significantly influences its physical and mechanical properties. A common issue in conventional concrete production is a reduction in strength due to uncontrolled porosity and poor air distribution. This study aims to evaluate the effect of sand powder substitution on concrete characteristics and to determine the optimal composition that enhances mechanical performance without compromising material efficiency. The experimental tests were conducted at the Materials and Construction Laboratory, Faculty of Civil Engineering, Universitas Tanjungpura, using a sand powder variation of 0%, 5%, and 10%. The tested parameters included unit weight, compressive strength, splitting tensile strength, flexural strength, and elastic modulus at curing ages of 3 to 28 days. The results showed that conventional concrete achieved the highest compressive strength of 34.802 MPa at 28 days, while the mixtures with 5% and 10% sand powder reached 26.26 MPa and 25.917 MPa, respectively. Although the substitution of sand powder reduced mechanical strength, its use has the potential to enhance construction sustainability by reducing the consumption of natural sand and utilising mineral waste as a replacement material.References
ACI Committee 01. (2016). Guide to Durable Concrete (ACI 201.2R-16). American Concrete Institute.
Amahoru, T. M., Johnny, S. H., & Kakaly, S. (2022). Perencanaan komposisi campuran beton menggunakan agregat 10/20 dan 20/30. Journal Agregate, 1(1), 89–93.
Azizah, A., & Ariani, I. (2024). Beton ramah lingkungan: Solusi hijau untuk konstruksi masa depan. Teknologi Sipil: Jurnal Ilmu Pengetahuan dan Teknologi, 8(2), 35-40.
Han, B., & Xiang, T. Y. (2017). Axial Compressive Stress-Strain Relation and Poisson Effect of Structural Lightweight Aggregate Concrete. Construction and Building Materials, 146, 338-343.
Jarek, G. K. (2025). Pengembangan beton ramah lingkungan dengan menggunakan bahan tambah alam kulit kemiri sebagai agregat kasar. Jurnal Intelek Insan Cendikia, 2(5), 8015–8029.
Kumar, K. A., Rajasekhar, K., & Sashidhar, C. (2022). Experimental research on the effects of waste foundry sand on the strength and micro-structural properties of concrete. Civil Engineering Journal (Iran), 8(10), 2172–2189.
Labaran, Y. H., Mathur, V. S., & Farouq, M. M. (2021). The carbon footprint of construction industry: A review of direct and indirect emission. Journal of Sustainable Construction Materials and Technologies, 6(3), 101–115.
Lase, H. M. P., & Gulo, M. J. (2024). Analisa kuat tekan beton dengan penambahan limbah plastik hdpe dalam campuran beton. Jurnal Dunia Pendidikan, 4(3), 1783-1791.
Mehta, P. K., & Monteiro, P. J. (2006). Concrete microstructure, properties, and materials. McGraw-hill.
Miller, S. A., Horvath, A., & Monteiro, P. J. (2018). Impacts of booming concrete production on water resources worldwide. Nature Sustainability, 1(1), 69–76.
Mulyono, T. (2004). Teknologi beton. Andi, Yogyakarta.
Neville, A. M. (1995). Properties of concrete, 4, 1995. London: Longman.
Permana, S., & Nardiansyah, A. (2025). Analisis pengaruh besar besar butiran agregat kasar terhadap kuat tekan beton normal: penelitian. Jurnal Pengabdian Masyarakat dan Riset Pendidikan, 4(1), 357-363.
Pradipa, B. R. C. (2023). Material penyusun dan formula campuran beton PT. Adhi Persada Beton Pabrik Margorejo. IKRA-ITH Teknologi Jurnal Sains dan Teknologi, 7(3), 121–139.
Siddique, R., de Schutter, G., & Noumowe, A. (2018). Effect of used-foundry sand on the mechanical properties of concrete. Construction and Building Materials, 17(2), 120–130.
Singh, S., & Shukla, D. A. (2023). Effect of rice husk ash on the properties of concrete. International Journal for Research in Applied Science and Engineering Technology, 11(10), 1056–1062.
Triadi, A., Roestaman, R., & Permana, S. (2021). Pengaruh penggunaan bahan tambah tipe A (Water Reducing) terhadap sifat-sifat beton. Jurnal Konstruksi, 19(1), 118-127.
Tw, A. R. P., Irianti, L., Sebayang, S., & Isneini, M. (2023). Pengaruh penggunaan Ordinary Portland Cement (OPC), semen modifikasi jenis III dan jenis IV, dan Portland Composite Cement (PCC) terhadap kuat tekan beton. Jurnal Rekayasa Sipil dan Desain, 11(4), 703-714.
Volchuk, V. M., Kotov, M. A., Plakhtii, Y. G., Tymoshenko, O. A., & Zinkevych, O. H. (2025). Investigation of the Influence of the Heterogeneous Structure of Concrete on its strength. Results in Materials, 25, 100659.
Wardhana, D. D., Suwito, S. A. S., Mukasyaf, A. A., Pratiwi, S. B., Alyya, L. S., & Nurchasanah, Y. (2025). Teknologi bahan susun beton dengan pemanfaatan abu-sekam padi: review artikel. In Prosiding Seminar Nasional Teknik Sipil UMS, 218-228.
Wora, M., & Ndale, F. X. (2022). Penggunaan bahan tambah additon he dalam campuran beton dapat meningkatkan kuat tekan dan kuat tarik beton mutu normal. Journal of Syntax Literate, 7(8).
Wulandari, D. A. R. (2017). Pengaruh penambahan ly ash dan superplasticizer dalam mencapai low cement concrete. Jurnal Ilmiah MITSU (Media Informasi Teknik Sipil Universitas Wiraraja), 5(1), 15-19.
Zhang, X., Zhang, S., Chen, B., Tian, B., Lu, X., Xiong, B., & Pan, Z. (2025). Study of concrete moisture transfer characteristics in the presence of the concrete micro–meso structure effect. Applied Sciences, 15(4), 1774.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
