Submissions
Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.- The submission hasn't been published before, nor is it under consideration by another journal (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
- Here are the URLs for the references.
- The text is single-spaced, uses a 12-point font, and employs italics rather than underlining (except with URL addresses), and all illustrations, figures, and tables are placed within the text at the appropriate points rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
Author Guidelines
Starting in 2026, Jurnal Teknologi Lingkungan Lahan Basah follows the writing style (template) which can be downloaded at The template and the guidelines of the article writing are available in MS Word (.docx) format.
Starting in 2019, Jurnal Teknologi Lingkungan Lahan Basah follows the writing style (template) which can be downloaded at this file.
The Authors' Guideline of Journal Teknologi Lingkungan Lahan Basah since the publication year of 2019
1. Introduction
Jurnal Teknologi Lingkungan Lahan Basah, with registered number ISSN 2622-2884 (online), is a scientific journal published by Fakultas Teknik Universitas Tanjungpura. At the national level, many common problems related to environmental engineering are addressed. This journal publication aims to disseminate conceptual ideas and research results in environmental engineering.
Jurnal Teknologi Lingkungan Lahan Basah has been available since 2013. This journal was indexed in BASE, GARUDA, ONESEARCH, Crossref, NELITI, and Google Scholar. The Jurnal Teknologi Lingkungan Lahan Basah editorial board invites you to submit your manuscript to be published in this journal. The example of a writing format article is The template and the guidelines of the article writing are available in MS Word (.docx) format.
2. How to Write the Title, the Name, and the Author ™s Address
The title of the manuscript should be written at the top of the first page with the center text alignment. Meanwhile, the author's name (without academic degree) and the author's affiliation address should be centered, as should the article title. The author should give two line spaces between the title and the author's name. Then, the space between the author's affiliation address and the abstract title is one space. The keywords must be written below the overall abstract for all words. Those should be arranged in alphabetical order and be separated by a semicolon, maximally three to five words. Moreover, the title of the article written in Bahasa Indonesia should also be stated in English (see the example above).
The responsible author, the correspondence author, or the corresponding author must be written first and then followed by the second, the third, and so on. The communication regarding the article revision and the final statement will be sent via email only to the corresponding author. If there is more than one author, the authors' names should be written down separately by a comma (,). If the author's name consists of at least two words, the first name should not be shortened. If the author's names are only one word, they should be written as they are. However, in the online version, it will be written as two words with the same name for metadata indexing. (Camdali and Tunc, 2006; Fridman, 2008).
3. The Manuscript General Guidelines
The manuscript text general guidelines are as follows:
- The manuscript is the authentic research result that has not been published yet in other publication media or publishing houses.
- The manuscript text ought to be written as this article template. The article is written on A4-sized papers (210x297 mm), with custom margins as follows: left 25 mm, right 20 mm, bottom 20 mm and top 30 mm, Time New Roman theme font, 12pt font size, and 1.5 line-spacing.
- The manuscript is typed using Microsoft Word program on A4 paper, around 6,000-7,000 words including figures, tables, and references.
- The manuscript does not contain any plagiarism elements. The editorial board will directly reject the text that indicates plagiarism. We use plagiarism software (iThenticate) to check your manuscript.
- The manuscript that has been written under the guidelines of Jurnal Teknologi Lingkungan Lahan Basah (in MS Word format, use this article template) must be submitted through Online Submission System using Open Journal System (OJS) on the E-journal portal (http://jurnal.untan.ac.id/jmtluntan) choose only one procedure. Then, register as one of the authors or reviewers in the "Register" bottom.
- The manuscript article writing guidelines and template can be downloaded. The template and the guidelines of the article writing are available in MS Word (.docx) format.
- The manuscript online submission can be viewed in the part of the online submission guidelines below.
- The manuscript which is inappropriate with the Jurnal Teknologi Lingkungan Lahan Basah writing guidelines will be returned to the author before the reviewing process.
- The manuscript should contain several aspects of a scientific article as follows: (subtitles as the order), which are: (a) the title of the article, (b) the author's name (no academic title), (c) the affiliated author's address, (d) the author's email (e) the abstract and the keywords, (f) the introduction, (g) the research method, (h) the research findings and discussion, (i) the conclusion, (j) acknowledgement, (k) the references.
- The subtitles included in the discussion part (Introduction, Methods, Findings, Discussion, and Conclusion) should not be numbered. The subtitles are written in bold, title case. It uses the left text alignment without an underline. The next expanded subtitles should be written in bold, in sentence case, with left text alignment and level-2 numbering.
- The words from uncommon or foreign languages are stated in Italic format. Each paragraph started 10mm from the left-side border, with no spaces between paragraphs. All numbers are written in Arabic numbering format, except for the new sentence.
- The tables and pictures are placed in the text group after the referenced tables or pictures. Each picture must be given a caption and source (Figure Caption) below the picture, and be numbered in Arabic numerals, followed by the picture title. Each table must be given a table title (Table Caption) and numbered in Arabic numerals above the table, followed by the table title and source below the table. The attached pictures should print well in black-and-white ink (font size, resolution, and line spacing are clearly visible). The picture, the table, and the chart should be placed in the center between text groups. If it is larger, it can be placed in the center of a page. The table should not contain vertical lines, while horizontal lines are allowed only for the important point.
4. The Guidelines for the Manuscript Body Text
The title of the manuscript: The title should be informative and be written both briefly and clearly. It cannot have diverse multi-interpretations. It has to be pinpointed with the issues that will be discussed. The beginning word is written in a capital case and symmetrically. The article title contains no uncommon abbreviations. The main ideas should be written first, followed by their explanations. The article title should be written in 12 pt, bold, and centered.
Abstract: The abstract has to be written within 250 words maximum and followed by three to five keywords and arranged alphabetically. An abstract must contain research objectives, methods, results, conclusions, and limitations (optional). Abstract written in 1 space line and 12 font size Times New Roman.
Introduction: The introduction must contain (shortly and consecutively) a general background and a literature review (state of the art) as the basis of the brand new research question, statements of the brand new scientific article, main research problems, and the hypothesis. In the final part of the introduction, the purpose of the article should be stated. They should be included in the literature review to demonstrate the novelty of the scientific article.
Methods: The method explains how the research is conducted, including research design, data collection, research instrument, and analytic methods. This part should be narrated.
Findings and Discussion: This part consists of the research results and how they are discussed. The results obtained from the research have to be supported by sufficient data. The research results and the discovery must answer, or be the research hypothesis or research question stated previously in the introduction.
Conclusion: This is the final part containing conclusions, limitations, and recommendations. The conclusions will be the answers to the hypothesis or research question, the research purposes, and the research discoveries. The conclusions should not contain only the repetition of the results and discussions. It should be a summary of the research results, as the author expects, in line with the research purposes or the hypothesis. Research limitations and recommendations include deficiencies in the research and suggestions for further ideas.
Acknowledgment: Acknowledgements to those who support the research (sponsors and respondents). Families and supervisors are not allowed in this section.
References: All the references used in the article must be listed in this part. In this part, all references must be from primary sources (scientific journals) and must constitute at least 80% of the total. They must have been published in the last 10 years.
5. The Guidelines for the Citations and References
All the served data or quotes in the article taken from the other author's articles should be attached to the reference sources. The references should be managed using reference management software such as Mendeley. The writing format used in Jurnal Teknologi Lingkungan Lahan Basah follows the format applied by APA7thEdition (American Psychological Association).
7. The Online Submission Manuscript Guidelines
The manuscript text must be submitted by one of two systems (as the second procedure is more preferable):
- The document should be submitted by Online Submission System in the Jurnal Teknologi Lingkungan Lahan Basah E-journal portal HERE.
- Firstly, the author should register as either an author or reviewer (checking role as author or reviewer) in the "Register"
- After the registration step is completed, log in as an author, click in "New Submission". The article submission stage consists of five stages, such as: (1). Start (2). Upload Submission, (3). Enter Metadata, (4). Upload Supplementary Files (5). Confirmation.
- In the "Start" column, chose the Journal Section (Full Article), check all the checklists.
- In the "Upload Submission" Column, upload the manuscript files in MSWord format in this column.
- In the "Enter Metadata" columns, fill in with all the author data and affiliation. Including the Journal Title, Abstract and Indexing Keywords.
- In the "Upload Supplementary Files ( 1. Publication Ethics and Conflict of Interest 2. Research Contribution Authenticity Statement 3. Cover Letter for Submission )" columns, the author is allowed to upload supplementary files, the statement letter, or any other else.
- In the "Confirmation" columns, if the data you entered are all correct already, then click "Finish Submission".
- If the author has difficulties in the submission process through the online system, please contact Jurnal Teknologi Lingkungan Lahan Basah editorial team at jurnal.lahanbasah@gmail.com.