Analisis Blending Bauksit Menggunakan Metode Simplek Di PT. Bumi Khatulistiwa Bauksit Kecamatan Meliau Kabupaten Sanggau, Kalimantan Barat.

Authors

  • Vico Malo Mangunsong Tanjungpura University
  • Muhammad Khalid Syafrianto Tanjungpura University
  • Ricka Aprilia Tanjungpura University

DOI:

https://doi.org/10.26418/jtllb.v14i1.96252

Keywords:

Bauxite, Blending, Grade, ROM, Simplex

Abstract

PT conducted the blending calculations. Bumi Khatulistiwa Bauksit has not yet yielded efficient results. In terms of grade, the blending results exceed the company's specifications. Regarding tonnage, the company uses only a small amount of ROM, so it cannot fully maximize ROM with low-grade material. The research aims to optimize ROM with Al2O3 levels below 46% that are not selling well, thereby maximizing both grade and tonnage. The study calculates the blending activities in a barge with a capacity of 9.500 tons. Blending uses a 3-ROM composition and is simulated in blending activities using the simplex method to achieve optimal tonnage, in line with customer-grade requirements. The blending calculation results for bauxite using the simplex method show ROM 03 at 3.790,84133 tons, ROM 06 at 3.451,05238 tons, and ROM 12 at 2.248,10629 tons, with Al2O3 at 46,171%, SiO2 at 12%, and RSiO2 at 4%.

Author Biographies

Vico Malo Mangunsong, Tanjungpura University

Department of Mining Engineering

Muhammad Khalid Syafrianto, Tanjungpura University

Department of Mining Engineering

Ricka Aprilia, Tanjungpura University

Department of Mining Engineering

References

Ali, M. M. (2022). Metodologi Penelitian Kuantitatif dan Penerapan Nya dalam Penelitian. JPIB: Jurnal Penelitian Ibnu Rusyd, 1(2), 1–5.

Almeida, J., & others. (2024). Learning Parameters for an Adaptive Linear Programming Algorithm. Algorithms, 17(2), 48. https://doi.org/10.3390/a17020048

Bagani, I., & Acheampong, M. A. (2023). Leaching study of Guinean bauxite tailings using a citric acid medium. Sustainability, 15(23), 16232. https://doi.org/10.3390/su152316232

Budianti, R. S., Nurrahman, A. A., Afriyadi, H., Ahmadi, D., &

Harahap, E. (2020). Penggunaan Metode Simpleks untuk Memaksimalkan Target Sales pada Penjualan Paket Internet. Jurnal Riset Dan Aplikasi Matematika, 4(2), 108–114. https://doi.org/10.26740/jram.v4n2.p108-114

Buelga Díaz, A., & others. (2025). Grade Control at the Corta Atalaya Mine through Short- and Medium-Term Planning. Minerals, 15(1), 44. https://doi.org/10.3390/min15010044

Chen, Z., & others. (2022). A multi-objective optimization of polymetallic ore blending based on NSGA-III. Sustainability, 14(17), 10766. https://doi.org/10.3390/su141710766

Cudjoe, M. N. M., & others. (2024). Analysis of available software for material tracking at mines. Mining & Metallurgy Exploration. https://doi.org/10.1177/25726668231222997

Dyussenova, S., & others. (2022). Processing of Low-Quality Gibbsite--Kaolinite Bauxites. Metals, 12(6), 1030. https://doi.org/10.3390/met12061030

Feng, Z., & others. (2023). Research on the Multiobjective and Efficient Ore-Blending Scheduling of Open-Pit Mines Based on Multiagent Deep Reinforcement Learning. Sustainability, 15(6), 5279. https://doi.org/10.3390/su15065279

Guerrero-García, P., & Hendrix, E. M. T. (2023). Experiments with Active-Set LP Algorithms Allowing Basis Deficiency. Computers, 12(1), 3. https://doi.org/10.3390/computers12010003

Hu, G., & others. (2025). Research on the Efficient Desilication Process of Low-Grade Bauxite in Guangxi. Crystals, 15(8), 675. https://doi.org/10.3390/cryst15080675

Huaman, R. J. A., Ullah, I., & de Tomi, G. (2025). Stockyard management is integrated into short-term mine planning using dynamic block modeling. REM - International Engineering Journal, 78(2), e240040. https://doi.org/10.1590/0370-44672024780040

Ige, O. E., & Kabeya, M. (2025). Multi-objective optimization of raw mix design and alternative fuel blending for sustainable cement production. Sustainability, 17(16), 7438. https://doi.org/10.3390/su17167438

Kabemba, M. C., & others. (2025). Dynamic optimization approach for the design and operation of comminution circuits. Processes, 13(2), 443. https://doi.org/10.3390/pr13020443

Khosravi, R., Yu, C., Abedini, A., & Zhou, L. (2025). Geochemical constraints on critical metals in the Jajarm bauxite deposit in Northeastern Iran. Scientific Reports, 15, 25256. https://doi.org/10.1038/s41598-025-08487-0

Lestari, S., & Abdullah, R. (2018). Optimalisasi Pencampuran Batubara untuk Memenuhi Kriteria Permintaan Konsumen dengan Menggunakan Metode Simpleks dan Evaluasi Biaya pada Proses Blending Batubara di Lokasi CV. Tahiti Coal, Talawi, Sawahlunto, Sumatra Barat. Bina Tambang, 3(3), 974–983. https://doi.org/10.24036/bt.v3i3.101426

Liu, N., & others. (2025). Research on desiliconization of brown corundum fly dust and low-quality bauxite using the method of roasting--alkali leaching. PLOS ONE, 20(11), e0316172. https://doi.org/10.1371/journal.pone.0316172

Lopes, Á. D. O., Rocha, H. R. O., Servare Júnior, M. W. J., Moraes, R. E. N., Silva, J. A. L., & Salles, J. L. F. (2023). A stockyard-port system model for management: A case study. Sustainability, 15(11), 8970. https://doi.org/10.3390/su15118970

Mboyo, H. L., & others. (2025). Distribution of Operating Costs Along the Value Chain of an Open-Pit Copper Mine. Applied Sciences, 15(3), 1602. https://doi.org/10.3390/app15031602

Moura, L., & others. (2024). Evaluating the behavior of bauxite tailings dewatering in the flocculation process. Minerals, 14(8), 827. https://doi.org/10.3390/min14080827

Muchjidin. (2006). Pengendalian Mutu dalam Industri Batubara. Institut Teknologi Bandung.

Quelopana, D., Carvajal, J., & Elgueta, M. (2023). Technology upgrade assessment in a mine-to-mill operation: A case study. Minerals, 13(5), 642. https://doi.org/10.3390/min13050642

Ramadan, N. W., Syahrudin, S., & Syafrianto, M. K. (2022). Analisis Blending Bauksit Menggunakan Metode Simplek di PT Jaga Usaha Sandai Kabupaten Ketapang Provinsi Kalimantan Barat. JeLAST: Jurnal Teknik Kelautan, PWK, Sipil, Dan Tambang, 9(3).

Rumahorbo, R. L. (2016). Konsistensi Metode Simpleks dalam Menentukan Nilai Optimum [Doctoral dissertation]. Universitas Negeri Medan (UNIMED).

Saavedra, M., Risso, N., Momayez, M., Nunes, R., Tenorio, V., & Zhang, J. (2025). Blending characterization for effective management in mining operations. Minerals, 15(9), 891. https://doi.org/10.3390/min15090891

Santos, P. H. C. dos, & Costa, M. L. da. (2021). Mineralogy, geochemistry, and parent rock of Décio bauxite-bearing lateritic profile (Rondon do Pará, Eastern Amazon). Brazilian Journal of Geology, 51(4), e20210037. https://doi.org/10.1590/2317-4889202120210037

Solang, G. D., Rande, S. A., & Wardana, N. K. (2021). Kajian Proses Blending Pengapalan Bijih Nikel di Site Moronopo PT Antam Tbk UBPN Provinsi Maluku Utara. Mining Insight, 2(2), 79–90.

Sun, J., Gao, Z., & Chen, J. (2023). A novel process for the extraction of alumina and silica from high-silica bauxite by H$_2$SO$_4$ leaching and precipitation. RSC Advances, 13, 20158–20167. https://doi.org/10.1039/D3RA03362G

Syahputra, E. (2015). Program Linier. Universitas Negeri Medan (UNIMED).

Triatmodjo, B. (2002). Metode Numerik: Dilengkapi dengan Program Komputer. Betta Offset.

Weiss, H. J. (2005). Quantitative Methods: Production and Operations Management (POM-QM). Software for Decision Sciences.

Widatama, G. S., Wijaya, A. E., & Sidiq, H. (2022). Analisis Blending Batubara untuk Memenuhi Permintaan Pasar di PT. Baramutiara Prima. Mining Insight, 3(1), 73–84.

Winarno, T., Ali, R. K., Simangunsong, H., & Almiftahurrizqi, A. (2023). Characteristics and Genesis of Laterite Bauxite in Sompak District and Surrounding Areas, Landak Regency, West Kalimantan. Indonesian Journal on Geoscience, 10(1), 37–49. https://doi.org/10.17014/ijog.10.1.37-49

Wu, H., Zhang, Y., & Li, J. (2022). Multi-objective ore blending optimization considering milling and flotation performance. Minerals, 12(11), 1358. https://doi.org/10.3390/min12111358

Wulandari, S. A., Defriyanto, & Suherman. (2019). Optimalisasi Keuntungan dalam Inovasi Bisnis Model dengan Menggunakan Linear Programming Metode Simpleks. Inovasi Pembangunan: Jurnal Kelitbangan, 7(2), 197–210. https://doi.org/10.35450/jip.v7i2.137

Xiang, P., & others. (2025). Ore blending optimization model based on NSGA-II and multi-objective fuzzy decision. Mathematics, 13(11), 1843. https://doi.org/10.3390/math13111843

Yao, J., Wang, Z., Chen, H., Hou, W., Zhang, X., Li, X., & Yuan, W. (2023). Open-Pit Mine Truck Dispatching System Based on Dynamic Ore Blending Decisions. Sustainability, 15(4), 3399. https://doi.org/10.3390/su15043399

Downloads

Published

2026-01-29